© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have pulled the vacuum pipe from both throttle bodies and checked the pipes for leaks and its fine. I reconnected to the ports and noticed that...
cheers, I have tested the vacuum prior to the connection to the vacuum tank and there is nothing. Before, the vacuum pulled quite strong from this...
Hi Guys, 355 Spider - 5.2 Euro model Today I removed the the vacuum assembly (tank, solenoids, air pump etc) as I wanted to see if I could fix...
Thanks guys. Done a few more tests this morning. I repaired the vacuum can and refitted with correct pipework. With this configuration, the...
I have just pulled both pipes from each solenoid and attached a hose to blow through. I could blow air through both solenoids with the ignition on...
Thinking about this a bit more, I am thinking that the solenoid for the bypass is stuck open thus vacuum always applied. Now that the tank is out...
Hi Guys, The other connection to the vacuum canister has just snapped off as I tried to remove the pipe - the plastic had perished. However...
Thanks everyone. http://www.eurospares.co.uk/userImages/003/Large/003_008.gif I noticed this morning that pipe 35 was not connected to the...
Rifledriver - I think your right. The Bypass valve is currently connected via a 15 cm plastic pipe direct to the main metal pipe that runs...
Thanks... If I pull the vacuum hose the valve closes immediately. Its not catching anywhere. Looks like the vacuum is incorrectly being applied...
Hi, I have had my Bypass wired open for the last year or so due to the rattle issue. I've just had the engine out service and got a friend to...
I believe that the actuators are the same as on the 355. Often the actuators are Ok, but the small crown gear on the top of the suspension tower...
Have a look at it on ebay....
forgot the link .......
Its on ebay (better picture). What do you think?
Hi, I have just bought a 97 355 Spider. Really happy with the car, but I want to get a Tubi asap. This is a picture of an exhaust that is...
Hi, Does anyone know of a specialist in the Notts area that can do a PPI on a 355? Cheers
Hi, Does anyone know whether the dealer network will provide details of a cars service history (confirm whether recall work has been done,...
Hi all, Just back from looking at a 99 360 F1 (private sale). The car is in very good condition and It's everything that I'm after. There is...
