© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
There is always the option to test the wires with a spray/mist of water. Should you be prepared and willing to perform the test, one would have to...
The torque wrench appears to be new but looks like a light saber..? I am sorry Sir, but my torque wrenches are expired from certification and I am...
This replaces most of the original system, right? Yeah, where should you install the O2 sensors? I think Ferrari installed them on the location...
The gap of the spark plug is set from the factory though I wouldn't recommend tampering with it, why? It typically is around 0,7 mm or the 1,0...
The 165 psi cannot get higher because the compression ratio indicates that pressure. As far as basic knowledge serves me, it is that simple.
Ah right the leak down test should work fine because suppose a valve is sealing bad, it really shows up by air rushing out the cilinder. You...
The 'fogging oil' works very well in my experience. Marine shops sell those oils from Quicksilver brand for example, and the course was emptying...
Hmm het staat vermeld in het Denso boek, of niet soms? Gebruikt u die bougies niet?
Spark plug reading has to do with performance of the combustion chamber so it must be an assessment of engine's health. Complication arises if you...
Try this without the gas analyser; stop the engine after a run by turning the key. Start the engine immediately and see if it will come on. This...
One other thing. About the markings on the camshaft. With all comments made on the subject one could argue those factory workers were drunk when...
On working with the 'pro-wheel' I think, once its set on the engine, you really shouldn't touch the degree wheel because it could easily be 'off'....
Here is my idea with electrics: as i was told by an experienced electricien, clean wire terminals and try pull the wire at the wire block. The...
Very very nice collection...:)
And nice pics they are. You have some amazing work done there, congrats! :)
Maareh...kan ik ens mee parachutespringen alstublieft :)
Well that is a pretty neat seal. That is, it has all you want, an excellent quality materials (viton), a dust seal (the small lip) and its made...
Awesome car, hope you enjoyed driving it at the track! :)
I had one repair on such castiron brake part (brake cilinder) with new seals and fine honing with WD40 but I was not happy when I saw the fluid a...
I wouldn't trust the part anymore.