© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Transmission fluid starts to break down over time, with the additives settling into the bottom in a solidified state. I know this because I had...
A lot of times this "passive" EGR is not controlled electronically but set in base timing of the camshafts. A lot of the Ferraris have this...
Both the above procedure and a clutch bleed with Kisspoint adjustment are highly recommended procedures before removing the gearbox to replace the...
Not dangerous when done in a proper diagnostic test drive, as I said, not in the wet, no flogging of the vehicle. No more dangerous than what is...
Stick an instant read thermometer in one of the center vents when the system is on Max A/C (temp on LO, fan on manual high, recirc activated) and...
I have seen this before on Stradales when the tires were replaced. Several times the overall circumference of the new tires were different side...
A lot of different head stud manufactures like ARP for instance advise against using thread locker on studs. Instead they recommend using teflon...
Yes, you will need to bleed the F1 system after removing a line, as fluid will drain out. It's not worth the risk of improper operation as...
The other finalist is Tony D from Algar. Another great guy, and he has made the finals in Italy I believe every year since they started this...
I ended up having to use the old one on a couple of occasions when the new design would not work, but unfortunately there are times when the old...
A few years ago, I had a problem finding the correct thermostat gasket for the 456/550/575/612, and 360 water pump. The problem I ran into is...
Dave, I'm looking for a hose kit for a 456M. I did not see one available for 456/550 on Ricambi, is one available yet? I have a customer...
Glenn being gone is actually a really good thing for the technicians there. Moral was at an all time low in the shop under his regime. Now it...
Whaaaaaaa????
More like you need to move away from the Pepco grid. That way if you lose power, you will get it back before you have time to fire up the...
Has there been any more news on when the scan tools will be ready? Is there someone at Durametric that a shop may contact to get more info on...
If you look on the website for most of the Ferrari Dealers, these are the prices they are advertising. It is their game to get you in the door,...
Funktion Auto, which is right next door to Dew, also has scales for setting up race cars, so you know it will be pretty accurate.
No, it is not normal. Check your tire pressures when cold, since you are having this problem, I would recommend checking them after it sits...
Taz, sorry to correct, but I'm sure you meant the other way around = 2 crank rotations for every 1 cam rotation.
