© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Glove box light?
The Sands Spyder should have squared-off headlight covers....
If you re-plate them in nickel, make sure your plater understands and mitigates hydrogen embrittlement.
SN 14389 had nickel on the A-arms when I took it apart. I am the second owner and it had not been gone through before.... as far as I know.
I believe those A-arms were plated with nickel in '71 and the support brackets that they are attached to are coated in clear cadmium. Things...
A heat gun and a putty knife has worked for me.....
I drive mine too but, for me, keeping it correct is a big part of the fun!
[ATTACH] I rebuilt this valve using the top casting (dry side) and mechanism from the original valve. The lower wet side casting was corroded and...
Thanks, Marcel. Did you find any new documentation confirming ownership?
Light Tobacco was the original color, as is seen in the 1972 movie photo. The car was re-trimmed later by Adler. I found cuttings of the factory...
Interesting .. It appears that adjusting the curve toward the lines of the Daytona could improve performance. That is, 2 degrees more static...
Thank you for your response. Then, to clarify, are you recommending that I use the curve shown in the 2cam service manual? It has a maximum...
Does the (S85A) distributor advance curve specified in the 2cam service manual apply equally well to the 4cam engine? Or is there a different...
Good point, ignition boxes are likely a false indication. Probably an earlier S/N as I just noticed the older style engine bay light shown in the...
Are you sure that includes USA cars with emissions components? The small square ignition boxes would indicate mid to late 1971 production. This...
That strut looks correct, but your air filter housing is not typical of USA spec Daytonas. They usually have eight hold down nuts on the cover.
Some time around late 1971 the factory started changing over to square end switch arms. The square ends are clearly shown in the "ADDITIONAL...
I used HVL leather in a recent Daytona restoration. Thick and challenging to work with, but nice stuff. Henk cares about getting it right. [ATTACH]
14389 firewall later in the process .. But still fiberglass. [ATTACH]