© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Right!
One option, which we could easily do, is to make a totally invisible repair by removing the door lock, welding the hole shut and painting the...
We, at Exoticars USA, believe that the reason why it won't start could be due to a bad fuse box or a faulty fuel pump. Did you check to see if...
Hi, this is Alex, Wil's son. My father has been AWOL this spring, finishing a hand-built project car (see link in my signature - 'Scratch built...
I agree with Kevin. At Exoticars USA, we use clay bar to remove tree sap and other stains. That's probably one of the best solutions. Good luck!
We, at Exoticars USA, and several other high performance restoration shops go to Gary Maucher in Ivyland, PA (near Philadelphia) for all our...
I can't find a spec in the manual. If you don't want to replace them just give them a quick cut on the lathe. If they're warped you should...
It could be a bad plug wire. If the car has sat for a while you may have had a mouse nibbling on a wire as well. It's rare but sometimes the...
When you do try to replace the bolts/studs I would get a turbo socket. Or just go ole vise grips. The might just come out. Usually you end up...
I've found that with today's gas the idle jets need to be 2 to 3 jet sizes big to run right. I've had this problem with a lot of DCNF and DCOE...
Also the computer doesn't like when you replace one sensor per bank. You need to replace the up and down stream sensors.
You will need to reset the learned adaptives with a factory scan tool or the light will never go out.
You should give the car an Italian tune up at least once a month to keep the valve seats clean and the oil moving. Use fuel stabilizer if the car...
In New Jersey anything over 100 mph is a felony.
I don't like it. It eats rubber parts and ethanol has sugars in it that clog fuel injectors.
Fu@k Bahrain. The goverenment is corrupt and oppressive. F-1 should stay far far away. viva la revolucion!!!!
With modern tires and a good tune a 427 can run in the low 10's. A 428 CJ in a mustang can run in the mid 11's with good tires. Granted these...
Just years of experience with webers. Sometimes you can run higher pressure but 2 psi is all you need and some DCNF's will push fuel past the...
If you have enough belt adjustment you shouldn't effect engine output. Anything under 3 degrees makes no difference on the street or track.
Yeah the clutch should last but if the previous didn't know how to drive who knows how long it will last.
