© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
There is about 1/16 of an inch (if your lucky) between the right half of the cam / chain area and the bulkhead / strut tower - Also the bulkhead...
Although I can't vouch positively until seen, it appears to likely be a Koenig Specials rear wing that was usually pared with matching side rocker...
Heh.. sorry Tom- looks like guilt by common interest ;) -Jason < The (20 question) culprit..
Body Number: The rear left body fender, front fender, underside of dash - stamped into the metal - the fiberglass engine cover and the carpet has...
IF the left rear strut top is definitive, it's 176 - ;) I haven't had a need to peek under the headlights, so the bucket numbers are still...
My best approximate guess would be that the body number correlates to the 176 number on this car - I'm thinking most of the parts were put...
This is something I've been pondering for a while (since post #7! :) ) glad to see it was picked up - perhaps if we find enough samples we can...
Yes- and a few others as well - it was also used in a few sports racer / formula car uprights in the early /mid 70's..
raymondQV- Thank you, and good catch on my typing! - the original is 44mm wide, while the GRW234 has the additional 1 mm, and is 45mm wide.....
In looking at the wheel bearings their is also the SKF part number GRW234 about $90 at most shops. Its the following size: 83mm od x 45mm id x...
A great step - easy to implement too.. A definite recommendation, for the stock configuration. Id implement that just to save on parts as those...
Machining the Ti pistons here isn't a problem - we have been doing it for some time on other makes and we were able to pull some 'off the shelf'....
Yes, driver adjustable bias, with a micro-delay actuation for the rears is in the system. Another piece implimented is that the rotor thickness...
The new ones have 42 /38 mm pistons - these calipers were used on the 2004 Volvo 60R series cars and some Mitsubishi cars. We are still dialing...
The brakes went through a couple revisions too.. so I suppose there are differences in braking ability between the cars as well mine had the...
Himm.. there does seem to be that perception, though other cars have had worse reps. Some of these concerns have been detailed on sites as the...
>>> I would imagine there would be some parts of the Jalpa community that would be interested in how to produce reliable, consistent HP from...
I was curious if anyone has seen or done other in depth testing with the Lamborghini V-8? With the usual 'magic number' of 100 hp per liter,...
Interesting Comparison - This is meant just as a comparison of the philosophy in each - no intention of stating in any way or implying, more or...
Anyone remember / know about the 1983 Monaco Grand Prix Pace Car Jalpa?
