© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Please correct me if I'm wrong, According to above pictures, the oil sump is not upgraded as mentioned in the service bulletin 10-16. Please...
Hello Steve, I checked on my 1986 328GTS, + 12VDC on the protection relay pin #30, but the pin #87 isn't connecter as showed on the picture...
The spolier reduce the vortex generated behind the rear window. The effect is that vertical air flow around the engine and through oil cooler is...
Congratulations,
The planetary gear BOSCH p/n is 1 006 200 006 to be use on starter motor assy p/n 0 001 110 004,...
You need to check the pin inside the connectors, follow the wire color from the starter to the battery, connector after connector. use for that a...
Superformance for a reservoir assy Ferrari Brake Parts for Ferrari 328 - Superformance
I removed the L/H drive shaft two weeks ago to replace the bellows. I removed the bolts with extensions on the tool. The torque was so high that...
I recommend you to verify the connector located under the pax footrest. make sure that the pins are correctly engaged. You need to remove the pax...
Done
Rob, The shooting was done at Southlake Northwest Regional Airport ?
Ferrari 308 GTSi Vollcabriolet in in Anzing | eBay
He don't need a horn, he is the only person who living at Complex City Great job, I like it Constance
I would suggest Prist (Ethylene glycol monomethyl ether) Prist is an fuel additive, he is used to bind the water particles to the fuel, and...
Thank you, This morning at Breisach am Rhein, Germany
Beauty and the Beast [ATTACH]
You planned to do some vent holes in your car ?
Question: when will you remove your catalyst converter ?
1 hour and 26 minutes to paint the plate, what is your labor rate ?
Fuel tanks has to be removed to rectify the shells to the original contours