© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
When you see PM 5 l l you may be seeing the right hash mark which is for -3*. The left hash mark, next to the 5-8, is for TDC on cylinder #5....
The sequencing of the ports doesn't matter on the CIS system, they are all continuously fed from the same chamber inside the fuel distributor...
Sadly tech (phones and gaming) for the most part has replaced cars as the most important interest in today's boys. When I grew up in the 1960's...
Another thing to consider is that timing belts in automotive engines was relatively new technology at the time with the Boxer being the first...
I believe that "early" 308's had plastic pulleys, "later" cars used metal pulleys. My car is a OCT "77 build, it has plastic pulleys. As Windsock...
I finally finish making a set of air injection port plugs for my GT4, it took a month to intermittently squeeze all 8 plugs in between all the...
Nice summation Phill. One of my best friends for 65 years is well over 6'-6" tall (think Edd China), he can't fit in my GT4, at least in the...
The photo looks exactly like my cover, just a flat piece of aluminum. I always thought that mine was a quick and dirty replacement made by a PO,...
Ferrari engines in motorcycles has been done many times before, Andreas Georgeades built some a several decades ago using a Dino V6 and 308 V8. I...
I wouldn't hold my breath. Recently we have seen certain politicians in California pivot 180* from positions not just held but championed only a...
Overthinking a non-existent problem and probably 99% of 308's have never had that U joint greased since it left the factory.
Circa 2000 I looked at this GTB in MARRONE, I thought it looked fantastic. the color really brought out the body lines and design features, most...
Need more information, year, model and built for which market. My first guess is that it is for fuel vapor emissions capture but those systems...
Don't forget to check the small pulley that the cable runs over where it exits from the body in front of the engine. Many a clutch cable has...
I have bent the handle in my GT4 on multiple occasions, it usually involves using it as a prop when entering/exiting the car. It's pretty thin...
This guy can show you how to do it. [MEDIA]
I agree 100%, spending a day pulling the engine is well worth the effort whether your project is the engine compartment or the engine itself....
Ha! the laughs on whoever did that. My car came to me with Compomotive wheels, they are about 10 times harder to keep clean than a stock wheel....
Looks like they were left in the plating bath for too long of time, it won't hurt anything, just a cosmetic issue. I usually use compressed air...
I haven't seen anyone listing a 20" arm, only 15" and 18", my 18" arms are more accurately around 17.25" depending on what one measures to. I...
