© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I’ve had the car for about 13 years. Chassis number is 03540. The wipers have always been problematic. I’ll review the thread and see if I can...
Thanks for the response Miurasv . I measured the wiper blades on the car and they are both 14 inches long. I think the picture I uploaded might...
Hi all, My 1972 Dino 246 has clapper wipers. I’m having trouble figuring out what length wiper blades are needed for the driver and passenger side...
The remote/key for my 2011 599 does not open/lock the doors until I am literally right next to the vehicle. I replaced the remote/key batteries...
My 1972 Dino (US Model) has 6 lobe distributor with dual points using an MSD 6A unit with an MSD brand coil. I was wanting to convert the...
Thanks for the quick and detailed responses. Alex
I glass bead blasted my aluminum valve covers on my E series Dino and was wondering what others used to protect the beautiful finish? I read that...
Sold
The tool does not depress the cam follower enough to insert the half-moon to hold the follower down to access the shim. I tried mightily to make...
I have a slightly used set of Ferrari valve adjusting tools from Hill Engineering for sale. The Hill Engineering Part Number is AS9560. I...
I’m in the process of adjusting the valves on my 246GT and was cleaning up the valve covers when I noticed the valve cover gaskets I purchased for...
Here you go. It’s the clutch spring circles in yellow. [ATTACH]
Thanks all! Since I need to remove and replace the helper spring, does anyone know of a good method to reinstall the helper spring that does not...
I’m doing some maintenance to my 1972 246 while I have the carburetors and manifold out. I plan on checking the valve clearances while the engine...
Correct. That’s exactly what I did when I replaced mine. There is a very thin O Ring that will need to transferred from the old unit to the new...
I replaced both of mine with the Maserati ones which are identical to the Ferrari ones because Summit racing was out of stock at the time. They...
Thanks again. Great advice too. Cheers, Alex
Success! Disconnecting and reconnecting the battery and then going through then reconnection procedure fixed the problem! Air coming out of the...
Thanks SkidKid. By Power cycle, do you mean cut the connection to the battery and reconnect? alex
Hi all, My 2011 599 A/C is not blowing cold. I checked the pressures and they are within range. When I was driving the car with the recirculation...
