© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
[ATTACH] I believe this pic is from an F12. The button on the right is front lift. What is the one on the left? Also, where are these buttons...
If driven on twisty backroads I have a hard time understanding how someone wouldn't enjoy the C8 Z06. Both the motor and chassis are an impressive...
old thread I know, but were you able to get a tune that improved the sensitivity?
For those with the Kline exhaust how much weight was saved over stock? Oengus: I had one manifold that ticked on startup as you describe. I...
My AC is working fine, just curious if the factory had a delete option. I didn't buy new but had the option been available I would have ticked the...
Was Air Conditioning Delete an option with the Scud?
That's good to hear. That's the range I was seeing but was concerned it was too high. It was in superfast mode when I logged it. Thanks
Thanks. I logged the pressure (with X431) and saw a peak of 69 bar. I presume the work shop manual lists normal pressure range. If anyone has...
What is the F1 System pressure range for the Scud? I've seen 41bar-52bar for the 430. Is the scud the same?
Did the 308 ever have power door locks?
I threaded the pins (using an M3 die if I recall). As they're plastic I went slowly and backed the die off frequently, but the resulting threads...
A diagram similar to this. [ATTACH] This is from Alfa I suspect..
I'm looking for a schematic of the F430/Scuderia F1 system. Can anyone provide this? Thanks
Would the key programming be under the Bosch Immobilizer System? If so I just checked that function and it doesn't do anything, at least with my car.
Thanks all. Using 430 ELP got me to the clutch bleed procedure. I ran it twice. Each time it bled 100ml of fluid. Does this sound correct? I was...
Thanks for the replies. I'll give it a try. Flash...that's good to hear it may support E Diff bleeding.
I've got a Launch X431 Mini ProS with Ferrari V10.95. Trying to do a clutch bleed. I'm using the following steps but can't see a clutch bleed...
Thank you!
mwstewart: Do you have a Scuderia? If so what do you mean by coded out? Thanks
Thanks. I've read recently that the heat generated by the air injection after startup can contribute to Scuderia manifold flange warping. Is...
