© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The 308 QV parts book shows an acorn nut and flat washer for the cam cover. Part # 11197774 superseded #11197771 according to Eurospares vendor....
That was my confusion. Only spring washers on my covers when I took them off. The part number shows a flat washer, so wondering what was used...
I'm unclear if both are needed. I got both a flat washer and wave washer when I ordered by one part number. Just want to make sure both aren't...
I'm installing the cam covers on an 1985 308 QV. Quick question; do I only use the spring washers under the acorn nuts to attach the cam covers or...
Here’s a shot from a ladder![ATTACH]
I’m replacing cam seals on an 1985 308 QV and wanted to double check the torque specs for the cam cover bolts and the collars that hold the cams...
Hello, When replacing the distributor oil seal on the intake cam on an 85 308QV, do I install the seal on the distributor plate while it’s...
Thank you for the replies!
I’m replacing leaky cam seals on my 85 308 QV and have a question. The car has the rock guards behind the cam pulleys, so do I have to remove the...
Thank you for all the helpful replies! I am using the red Mobil 1 synthetic bearing grease which dies seem thicker than the black grease that was...
When replacing the front wheel bearings, do I need to pack the hubs with grease between the bearings as well as the bearings themselves? If so...
Mine also had the original Goodyear NCT spare too when I bought it according the date on the tire as listed in post #11.
Just wanted to update my experience replacing the long heater hose on my '85 308. I used a 1/8" steel cable covered in plastic to snake through...
Sorry, Thanks Scott!
Thank you, Nick. I have replaced all the fuel/vapor lines previously along with the various heater hoses in the front. I even did the heater box...
OK, the long heater hose running from the engine through the driver's door sill to the Y-pipe under the front bonnet has expired and needs...
It's a stock exhaust with an aftermarket converter, which I believe is a Hyperflow? I remember rattling sounds in the muffler when I removed it...
Hi all, I event posted in a looong time but still enjoying the 308 QV! After going through the major maintenance items for the car six years ago...
My passenger side tips run hotter than the driver's side too. I have little ANSA stickers on each tip and the passenger side ones are almost...