© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
first transmission but built many engines. Skickat från min iPad med FerrariChat
hej, please do :-) Skickat från min iPad med FerrariChat
what next, how do i remove the shafts? Skickat från min iPad med FerrariChat[ATTACH] [ATTACH] [ATTACH] [ATTACH]
I am chasing a very noisy bearing during idle so main shaft need to come out. how do i pull the bearings as the orher part sits in the casing?...
Hej, trying to find a gearbox manual for the 348/t box. I am a bit stuck and need help as I can't remove the outer bearings on the right side....
Ernie, i am disasembling the box in another thread but having a hard time to get he layshaft gear nut off since it has been locktightened/glued....
and a movie with the play in the angle gears, i feel it is too sloppy. anyone?
However, I do need some help here. i do not know if the engagement/adjustment of the pinoin gear is good enough, it feel very loose. Also at...
tool created with inspiration from other forum members. it was a fairly simple thing just banging out the shaft and bearing. The good point was...
thx, i guess i'll have to build such a tool. the acctual bearing is resonably cheap so let's hope the shaft and gear isn't cheewed up as well :-)...
Hi, i have read many good threads regarding the issue of the loose locknut destroying gears and shafts on the clutch shaft. My mondial t box...
Old thread, did you manage to solve the noise issue? My trans is very noisy and i just started to take it apart. The Clutch release bearing...
i live in Vallentuna, the picture was taken on the 1st of May Italian car fest at Skokloster castle, I was the only attendant this year :D Sent...
a cold greeting from Sweden [emoji3] [IMG] Sent from my iPad using FerrariChat.com mobile app
please do thx, I only want the boot with the ferreri logo on; the wire itself is in good shape. Last time I broke one I managed to buy one...
Btw is there a possibillity to edit your own messages? Sent from my iPad using FerrariChat.com mobile app
One of the spark plug boots broke When i tried to fond a fauled plug and I have no need in buying a ned harness. Has anyone got a spare that I van...
use shell 5w/40 in mine and it runs almost 5 bar at 2200 rpm when oil is some 80 degrees, it goes to eight and full rpm but then I have new...
Hej, yes I had mine repaired by bosch in germany, please read this thread. http://ferrarichat.com/forum/showthread.php?t=342305 Mvh Joakim
If it's the K Jetronic (early) version then it is most likely that the enrichment start module is bad. The old K Jet had two enrichment functions,...