© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
i wonder if moving the rear 02 sensor to the rear of the main cat like the 430 will work.i had a 360 with the pre cats removed and the cel would...
removing the pre cat will cause the check engine light to come on.for some reason Ferrari measures the cat efficiency of the pre cat but not the...
I will ask my friend for the invoice and post it im not sure of the exact price but 5500 is pretty close.he had it done at Ferrari of Orange...
the stradale muffler is the same as a 430.only the tips are different.Ferrari sells the stradale exhaust kit with new ecus for less than a...
shell 75-90 would my first choice but any good 75-90 synthetic transaxle oil should be good as long as it has a friction modifier for the diff in...
i had the motronic ecus reflashed by gmg in so cal.the pis is 3.9mm which is normal for a cs.set it to 4.2 mm the car still creeps but the clutch...
pis could be set too low and clutch is still dragging.also clutch tends to drag with modified engine ecus more. not sure why.after flashing my...
Be cautious of clutch % it is a calculated figure based on the new clutch value in mm and the current clutch value in mm.the current value can not...
6 speed car have 2 also one for the right bank ignition and one for the left bank ignition.they just dont have the speed sensor @ the rear of...
the angular speed sensors are the ignition pickups on the bellhousing.they have nothing to do with the trans only the ignition system.thats why 6...
i know its a SKF brand bearing maybe there is a SKF part number and the local parts store can find it
Ferrari of oc works on older models one of the techs was the aston martin tech at newport imports.there is a lagonda there now.
Make sure you have the revalution sensors in the bell housing installed correctly.the one for the rhb goes on the left side of bellhousing and the...
355 cats and manifolds are marginal when everything is working correctly.if you change the cam timing from factory specs you could open up a new...
i have never seen a 360 belt break but i have seen them jump teeth when they are old the hydraulic tensioner stretches the belt even if the car...
the air flow meter low code means the error occurs at low rpm when the intake manifold is using the long runners.so the code is for the air flow...
didnt you say you had the head gaskets replaced recently in a different post.The probably didnt alighn the oil cooler properly when they re...
