© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I would be interested in A if that is available.
If anyone has a photo of the mechanism with the hood open I would appreciate seeing it.
When I press down on center/top (above latch), I don’t hear spring tension change. I hear more of contact between bottom of hood and the...
Sorry. “246”. My thumbs got in the way. I tried pushing down while pulling with no luck. I’ve also looked under the dash near the lever and...
Any suggestions on how to get the front trunk open? The latch mechanism on mine seems to be seized. The release itself moves slightly but the...
Can someone tell me what type of screw holds the fan onto the shaft of the motor? The one you get to through the access hole. I can’t get a hex...
Can someone tell me what type of screw holds the fan on the shaft that is in the access hole on the side? I thought it might my hex key but...
It appears that you have to remove the heat exchanger bracket and probably the oil lines to get the exchanger to move far enough in board to get...
Do you have any photos you can send? Pardon my ignorance but, does the "E" kit go with a 74 GTS? [email protected]
I'm having a Pertronics put in my 74 246. The shop called with a concern that the tach may not work with the Pertronics handling the ignition in...
You can see in the second photo that the heat exchanger tank is now at the maximum height in the clamp. The cause of the friction was from it...
I hope these photos show up. The car is back down and the patch was holding. I'll go look again in a few. I'll probably run this like this for...
I was able to move the heat exchanger up about a half an inch in the clamp that holds it. That allowed enough space to scrape off the under...
I will attempt the non removal first with a patch to the worn location. My only concern is that it will be quite difficult to work in that space....
Hello All, I'm a pure newbie to the list. My right side fuel tank in my US version 246 GTS has a leak where the coolant pipe passes close to it...
