© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks Joe...hope to get there
Thanks Joe...hope to get there!
Is there a gathering this Sunday 10/20?
The wheels were confirmed to be distorted and are magnesium so cannot be straightened by Alloy Wheel Specialists of Ct. Anyone have any options...
Thanks Guys, I now have 4 confirmed distorted wheels. I have reached out to Rimpro with pics and should hear back on Monday if they think they...
Good Day all, I am in Groton and frequent the Audrain car shows on Sundays in Newport,RI. Unfortunately this requires trips over the Newport...
Upon inspection, the three holes in the inside sheetmetal line up with the retaining nuts for the taillight. Those holes have plastic "fingers"...
The latch bolts thread into a loose plate which must be accessed through the taillight opening. in order to get them reengaged to the plate.
hello all, I am working on the rear engine lid latch cables and it appears that I need to remove the taillight assembly to reinstall the threaded...
FYI, I have successfully removed the manifold. I removed the rear motor mounts , and moved the parking brake cable from the crossmember.. The...
Hi all, I need to remove the rear manifold to repair a crack at the #1 cylinder flange. I have removed the rear mounts to lower the engine but...
Hi All, Previously I had no starter operation with the key switch in the start position which was traced to the harness plug near the left rear...
Connector 169 was the problem and although I checked it previously, removing the receptacle from the frame and thorougly cleaning the receptacle...
There is no power at the solenoid terminal with the key in the start position. Jumping between the battery and solenoid terminals provides good...
Hi All, I do not have any starter cranking and the alternator light does not illuminate. What I've checked/verified so far: 1) The bulb...
Hi all, I last used the car a week ago with no issues, and yesterday I have no starter action when the switch is turned to the start position.....
I made the trip to Black Horse Garage yesterday for the alignment...got a first class job and also got a personal tour of the facilities, cars,...
Hi All! Can someone give directions to the meeting spot from Groton, CT?? THKS!
Hi All, I have completed a suspension and steering rebuild and will need a full 4 wheel alignment this spring. I am located in SECt and am...
yes there is i cut a small wood block and tape it with a 2 face tape at 90 deg to the bracket so it is in the normal open position and then there...
