© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Bell Bloke: Yes, at idle the front bank seems to not run, but a higher RPM it comes to life. docmirror: Switching the sensors I haven't done...
Thank you for the advice. Yes, it seems that at idle there seems to be no ignition on the front bank, but at higher RPM's the bank is on. Not...
Finally had time to work on the car. It seems that during idle the front bank doesn't work but once I rev it, it turns to life and the front bank...
Thanks again, I will check on the weekend. One very strange thing is that sparks are getting to the plugs but cylinders on the whole bank do not...
Thanks, I will check asap.
thank you, will check out and get back to you guys, appreciate your help.
Ok, after checking the following, I still have the front bank not firing: 1. swapped the digiplex units, no change 2. measured all crankshaft...
Well I am back again. Turns out that the disconnection of the cold start injector didn't make a huge difference. I am kind of embarrassed to...
Alright I disconnected the cold start injector and unbelievable the engine runs much smoother. I saw a youtube video...
Ok, thanks for all the advice. A lot of things to check so one at a time I will. Just a few more pieces of information. The engine runs fine...
Hello everyone, I need some help. My Mondial 8 (1981) is running rich and backfires every time I turn it off. I've checked all the vacuum hoses...
82!
Thanks. My mondial's clutch is slipping all the time and the slave cylinder is leaking, so my first step is to rebuild the slave cylinder.
What were the symptoms of needing the clutch master cylinder changed???
Hello All, Would a leak in the slave cylinder cause the clutch to slip? I am having a real problem with the clutch slipping and the slave...
Anyone have technical advice on the best way to acquire a clutch and to repair a clutch on the Mondial 8??? Thanks in advance.
Thanks very much, I am out of Toronto
Just purchased a Mondial 8 and wanted to know how to get parts and service manuals? thanks
Thanks for the advice. If only 2-3 mm, then I should be OK. It seems small, but if those are the specs then I am ok! Thanks again. Any advice...
Just bought an 82 Mondial, don't know if the clutch is working properly, it engages very quickly i.e. right at the start of depressing the clutch,...