© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Mathias, I have not seen any M5 nut plates with a fiber or nylon ends, only steel plates. But a 10-32 nut plate has the same thread count as an...
Some more custom parts. This is the trunk license light contact. My car didn't have a trunk let along small parts like the contact! After looking...
Thanks George! The Airmaster is almost ready for covering and paint. I still have some sheet metal work to complete, cowling, dish pan and gear...
This car is a 1966 GT350 Vin number 6S1224. It was a Hertz rental car out of San Francisco airport. The original colors were white with gold...
Yes.... Alberto is right! With all my cars that I restore I show them for a year and then it becomes a driver. This is the last car restoration....
More parts! Here are the radiator fans that are now restored. One of the motors had a bent shaft due to the collision. I was fortunate to find a...
OK....this thread in getting toooo long but.... after looking at the non restored photo of the steering linkage, I'm going to repaint the...
I just looked up the joints in the parts book TAV 29 and it shows 2 different joints and it looks like my car has two lowers? Superformance shows...
Also looking at the Dino blog universal it is a different Universal than mine. It is very possible that small parts and bolt could vary depending...
Not to be argumentative but if you look at the Dino blog photos the universal link has Fiat 80 bolt. These bolt should be black oxide not gold cad...
The gold cad bolts are Verbus Bolts and the black oxide bolts are Fiat 80 bolts. All Bolts and nuts are original to this car except the bolts for...
I think all I had to purchase was an O ring. The pump is a centrifugal pump with no diaphragm just phenolic blades. I cleaned the bore and sanded...
More and more parts! I had rebuilt the steering wheel some time ago (see earlier post). I was NOT happy with the leather work that was done on the...
And even more parts! The fuel pump, fuel filter and mounting bracket were restored. I only had the fuel filter and bracket in all my stuff so I...
More Parts! Here are the restored head light buckets. The buckets were rusty on the bottom and bezels were missing. The wiring was not correct for...
For Forgot the photo! [ATTACH]
The white paint I use for all back fill in letters and etched detail is just white Rust-Oleum. I let it dry and then either us mineral spirits...
The steering links were also dissembled bead blasted then painted with all hardware plated to the correct color and then reassembled. New keys...
Here are some photos the steering column, signal stalks that are all restored and ready for installation. The stalks had some cracking in the...
Here are the paint codes for the Koni shocks and two other paints that I either had eye matched (brown for the air horn motor) and a Fleet color...