© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Here's a place you can try... http://www.worlduph.com/ferrari.htm
I'm not sure what 'Ferrari 308 GTB' has to do with a 3M product... what exactly are you looking for?
Making cam locks is very easy, made them out of scrap 1 by 3/4 trim i had in the garage. cut 2 pieces 10" long, clamp them together in a vise,...
So how do you get all the white residue out of the cracks of this mold fiberglass/plastic top? I was trying vinyl cleaner lol!
Thanks Cliff... yea, the stud itself twisted off flush with the new water pump i just installed. It seems that the torque requirements have caused...
I have an 81 308 GTSi, i've been changing my water pump and as some of you know, it's been wrought with problems. The latest... i twisted off one...
I'd like to thanks T Rutlands also for their great customer service. I needed a M6x1.25 nylock nut, very hard to find...everyone has M6x1.0 but...
I have to replace the hose that runs from under the windshield area (behind cab wall) that goes to a tee, and runs under the front drivers fender...
I let my 81 308 sit for a couple years without even starting it (females tend to cause priority shifts, never letting that happen again)......
There is one thing I need to know, are there any threads in the housing that mounts to the block? Do the large bolts on the water pump pass...
I used Seafoam Creep and heat applications several times on the stud that remained sticking out after I pulled the water pump off... I then used a...
OSH is not in my area.
Does anyone know the specs for the large water pump bolt? I believe it's 10mm, don't know the thread spacing though. Where could I find a...
I have what appears to be a different problem with my switch, my lights come up at half rotation of the switch knob. Once you pass half rotation,...
Well, it happened. After days of applying heat and soaking the bolt in WD-40... I put a 6 point socket on it and twisted the damn head off the...
I'm at my wits end... i have a 1981 308 GTSi 2V, i am trying to replace my water pump... i have removed both cam belt covers (ac compressor too of...
Possibly, I'm inclined to keep it for reinstall later when and if I ever sell the car.
Thanks for the replies guys, I'm going to try the wood block approach to hold tension. I've decided to leave the ac compressor out for now, it...
Well, there is no lock down fitting that slides into the bracket slot on mine. The other question i would have is, after getting at this nut...
OK.... I have to ask, what brilliant Italian engineer thought it was a good idea to put the alternator adjustment bolt that one must access,...