© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Confirmed: It's the Molex one. And while the pins are only $0.10 ea at DigiKey, the whole connector + pins is surprisingly available from Amazon...
Well that seemed totally plausible, since most of the "Molex" type connectors on our cars turn out to actually be AMP/TE products, but I think...
Addendum: The pins in question populate this connector where the car's wire harness terminates at the back of the pop-up headlight housing. [ATTACH]
This may be a longshot, especially in terms of keywords, since it's become popular to use "headlight housing" to refer to the lamp itself, but in...
I think I saw those—they do offer an H3, but they're only claiming 800 lumens and, just eyeballing the dimensions, it looks like the LEDs are in...
Can anyone recommend an LED retrofit for an H3 bulb that doesn't suck? Specifically I'm interested in finding one that produces an acceptable...
I don't have the patience to document anything via YouTube video, but here's a link to the LED replacement lamps that I can vouch for as being...
Pet peeve alert: Be very careful with LED retrofits for halogen bulbs. Although some of the latest ones are better than earlier ones, they tend...
Those relays are rated for 30 A, so yeah, they're fine for the four bulbs of the stock high beam configuration (~17 A total), and maybe even still...
Yeah, that's good advice, especially given the known fragility (and susceptibility to aging) of the fuse/relay panels in our cars. I am, to some...
If the OP never answered this, I can venture to guess that the 'extra' relay is to have a separate relay (and separate fuse) for left and right...
If anyone is still monitoring this year-old thread... I'm curious why you chose to modify the wiring with the aftermarket relay harness....
If my car (Mondial 3.2) didn’t have a coolant level warning light (which sets off a master warning light in conjunction), I’d probably do the...
@Ricambi America Ack, no, not the point! I'm pretty sure the cap is fine and the attachment flange on my reservoir is too worn to properly...
What? No. My measurement: 10 kPa = 0.10 bar = 1.45 psi = 0.01 MPa = 0.0987 atm = 2.95 in Hg = 75 Torr My radiator cap: 1.1 bar = 110 kPa = 16...
Has anyone considered the possibility that all the seemingly-otherwise-healthy 3x8s routinely pushing coolant out the overflow have worn flanges...
I think if you draw the circuit diagram you’ll see why the diode, installed as you’ve described, cannot complete the motor’s path to ground—that...
Well, half of that is true. o_O
Maybe there's a typo in there somewhere, but what you're describing would not conduct the ground for the motor, as current can only flow through...
I guess I'm still not visualizing what you're describing—from the switch's ground terminal to each of the switch's output terminals (to the motor)?