© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Looks like they have switched the CarFax to AutoCheck. Anyone with an inside connection to the Penske Corporate offices should send them this...
I got it apart and found the 2 of the 4 pins with bushings had broken off the sides of the lever. There's a seller on Ebay that offers a...
Screw comes up from underneath. Head of screw not accessible until lower part of F1 box comes apart. Looks like plenty of stuff in that box.
Threads look OK, just seems as though the screw came loose. Question is how to put it back together.
The "T" bar has come off of the top of my F1 reverse lever. I've removed the F1 panel but was hesitant to go any further. Looks like the plastic...
Yes it's just inside the door. Lesson learned . . . Be careful who you let drive it . Yes, this stuff is all in the books. Someone should...
It was the fuel / inertia switch. . Just for the record . . . I was not driving it.
Thanks A Lot ! Just getting ready to head back to the car and see what works. It's still sitting in the driveway. I'll post results.
Not yet. I'll give it a try. Take about an hour to get back.
Any idea what section the rollover switch is in. The PDF's seem to be not searchable. I'll keep looking.
Got the manuals. Looked thru them but nothing seems to match these signals.
turn key and usual system check runs. All looks OK except F1 Failure symbol on the multifunction display stays on and the audible alarm stays...
2000 360 Modena running fine @ 12,000 miles. Pulled into the drive a little too fast. Got slightly airborne. No bottoming or any damage. Engine...