© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Looking for a less expensive tool to torque the heads on my 360 Any help is appreciated
I use leatherique religiously but this has not solved the problem I havnt noticed the same issue with the 430 but maybe that's just because I...
After having my dash redone twice now I am convinced there has to be a better solution Living in south florida the heat warps the factory defrost...
I tried shutting off battery to reset the system But it's still doing the same thing I guess I will start with the thermocouple And o2 sensor...
The new bypass pipes are not glowing at Cold start I am not sure if I am chasing several problems or Just one
A little more info The slow down light comes on at start up and the car has no power So I am wondering if I am in some sort of hobble mode or...
An update on my cel problems Last time I ran the car the slow down light came on and as it turns out one of the cats was bad and had a hole in it...
Cleared the codes and took the car out for another run It took about 5 miles for the cel light to come on and the slow down to come In the...
Ok I cleaned the 2 grounds under the left drip pan before I put it back on I also cleared out all of the codes and swapped the coil packs between...
I was just using that part number to confirm that is what we are talking about They seem to be fine and spraying the carb cleaner on the bases is...
Looking at the top of the fuel tank there is a valve on the tank ref14 part 180384 Is this it? It appears to be fine no visible damage or fuel smell
Ok I used a whole can of carb/choke cleaner and I can not get any difference in idle I have the drip pans off and I do not see any obvious signs...
I am ordering a set of intake gaskets this could very well be the problem I am not familiar with a roll over valve Does anyone have a part...
I only have a code reader so I can't see any adaptive values Is there any way to narrow down the possibilities? Finding a leak can be difficult...
On my 99 360 I am getting 5 codes P0132 oxygen sensor circuit high voltage bank 1 sensor 1 P0300 random multiple misfire detected P0301...
Any recommendations on a decent quality outdoor car cover? I have the factory red satin cover for indoors but I want a cover for when I leave the...
Strange it doesn't seem to make a difference if the engine is warm or not If I turn the motor off and restart it the codes are back
Some more info I get the codes at start-up If I erase the codes after the engine is started and warmed up they don't come back while driving....
SincE I am getting a code for each bank it would have to be both 02 sensors I am wondering what would effect both banks
I also had a misfire code on cylinder 1 so I replaced the coil and that got rid of the misfire code but the other 2 codes keep coming up I am not...
