© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
its NBR rubber coated nylon (as has been used earlier bij effbe who produced the membranes for bosch). NBR or Nitrile or Buta N resistance is fair...
Because I had problems adjusting the right fuel flow from my fuel distributors (as described in the WSM) I rebuild it (see the earlier post on...
I had problems with my headlights and changes the diodes. When you remove the headlight motors from your car you can see the electrical contacts....
I have made a couple of m12 * 1,5 dome nuts and put the on my site. With these nuts you can fit the (cheap remake) fuel pump with an outside check...
hello, I'm happy to see that every body is sharing his manuals. I have some manuals (not the WSM) on my website. You can donwload the manuals...
Hello, I have the wsm 400i as PDf file. The total file size is 60mb. If you pm me your post address I will send you the wsm on a CD. You can...
Tony, If you are still looking for a WSM. I tried to contact you. You have used the option not to receive private messages. Please pm me your...
It is possible to replace both alternators for one new alternator with a higher capacity. I'm having contact with a company who refurbishes...
front calipers alfa 6 (or alfa sei) rear calipers b.m.w. 1802 (E2) These calipers are also hard to get. The alfa 6 and bmw have smaller...
just bought the 0438170004 for my 400i and paid us$104 by rockauto The 400i has a K Jetronic. I hope that I orderd the right accumulator.
You have to do some fuel pressure tests and have to check if the injectors are still ok. See the WSM You can download the k jetronic books form my...
Hi Rob, You can make a few test first before disassembling the fuel system. Mark from Germany is working on a FD for a 8 cylinder Ferrari. I...
Steve I have build a new website for the unobtainable Ferrari parts. The site is build based on my 400 but the parts fits on other Ferraris....
Does enyone know if the workshop manual of a ferrari 400 i exists. I have a italian 365 2+2 wsm but this manual doesn't have the k jetronic system...
motob I donm't now the MB number but the ferraei numbers are 106625 and 175189. These grommets are used on all ferrari's See the eurospares...
Good work guys. This is the way to learn more about the FDs and K jetronic. Mark you can try to spray Teflon (PTFE) spray on the barrel and fuel...
I'm not suggesting you can calibrate the fd yourself. I advice everybody not to touch the calibrating screws. You have to choice between a bat...
the result was 3 injectors of the 12 where to be replaced. "European" bosch injectors cost us dollar 50. I don't understand why the injectors in...
Hi They sell the bosch pump look a likes here in the Netherlands. They are to test diesel injector and can hold a pressure of 400 bar. I could...
Hi, I replaced all the heater hoses of my 400 (inside diameter 15 mm) total lenght of 8 meter. Took some time but no leakages of water. You can...