© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I guess it is worthwhile to know if you are into tracking your car or just driving for pleasure. If you enjoy track days then i can certainly...
I had the exact process done on my muffler sometime ago. Since then i not only driven well over 1000 miles, as well i did 8 pretty hard track...
Why take risks on public roads. If you want to try go to a track. That really is the only safe way to do these things.
I use redline lightweight shockproof. I track my car often and change the oil once a year. So far every thing is great.
I do wait for the Engine OK signal. Why would shutting down and starting immediately change anything? Is this an injector issue then? I certanly...
Usually I do not get a chance to drive the car during the week days. While sitting in the garage the car remains plugged in to CTEK 3300 battery...
No nitrogen. Just air. I also used a tire pyrometer with tire temperature measuring probe which is like a little needle that you stick into the tire.
Tire temperature mesurements were not as scientific as i wanted it to be. First off all it was after a cooldown lap and due to other reasons i was...
Perfect. Thank you all for helping.
Thanks everyone. I actually did take tire temperatures on inside/middle/outside but did not mention this in my original post. The differences...
Yesterday during the track day I did an experiment. After each session I measured the tire temperatures and pressures. I run Bridgestone Potenza...
i had it welded at the beginning of this season. Since the welds, i put on about 1000m but more importantly i did five intense track days where i...
I do lots of track days and the welds are holding up fine. I checked several aftermarket mufflers and they all have these joints welded. As far as...
John, remove the muffler and get the press fit ends welded. Dust goes away. I had the dealer do this for me. No mystery to this at all. Inside...
Others cut the muffler open and posted pictures before. Do a search. It is not worth ruining a perfectly functional muffler.
I have an '06 three pedal 430 and I had the same issue. I replaced the gear bushing (purchased from Ricambi and installed by my dealer) which was...
You really sould get a Scud front bumper. It will look so much better. You came this far, take the next step. Congratulations.
Thank you very much for all your help and support. I will start hunting for a hunter machine
I bought Bridgestone RE-11 tires (front 235/35/R19 and rear 285/35R19). It looks like neither my dealer nor the local tire shop is not able to put...
I will be also very much interested in your results from changing the bushing. I have a 2006 manual F430 and when the car is cold going from 1 to...
