© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
What is the ambient temperature and what equipment are you charging with? It is hard to get a charge in with lower ambient temperature unless you...
The fittings are 1-14UNS RotaLock. The proper backhead for a 7H compressor is a CB. Sanden doesnt have an off the shelf compressor with a CB...
Are you in California? Your door jamb photo shows a CA BAR sticker making that a CA legal Euro car. I think that is a point worth mentioning and...
Kim, My '85 Euro gave me similar symptoms once, I'd go back and double check your caps and rotors. Those are the bits you've been fiddling with...
The drive was not bad at all; pockets of traffic here and there but nothing enduring. EZ-pass is of course a huge help in breaking out of the...
So before you send your boxes out for testing, try swapping them and see if your fouled plug condition migrates to the other side.
I'm in. Looks like Rockville or maybe Frederick would be a good place to meet up. An early start would probably be best.
I'm leaving from Fairfax on Saturday morning, staying until Wednesday or Thursday.
BLUF: I'm driving to Montreal 7-11 June if you need a ride. I'm meeting up with family to take in the F1 race in Montreal (and turn 40). Flying...
Mitchell, If you want to do what I did the Sanden number is 4465, but it doesn't quite work out of the box. The back head, were the hoses...
Mitchell, Mine's a euro so it came with Sanden mounts. Looks just like the apparatus Andy posted pictures of; that metal bracket and a couple of...
I did mine in 2015 with the help of these guys https://www.acparts.com/ on my '85 Euro GTB. I wanted to keep it as close to stock looking as...
Thinking through the symptoms, I would think a fuel pump problem would give a little sputter before cutting off. If I understand correctly it is...
Soaking the hose in hot water will also help soften it up a little.
Mike, No worries. Feel free to PM if you need more info. Cheers, -seth
My parts source was A/C Parts also known as Aero Climate Control Inc and A/C Parts Warehouse. Compressor was a Sanden SD7 4465 with CB head and...
Mike, I went through the same drill you are going through now about a year and a half ago with my 85 euro. I went looking to replace the seal...
I also used the Goodyear galaxy hose. Pulled it through with the fittings on. I used the old hoses to pull a pull string through (550/parachute...
Try holding it at a level close to its installed position. The "inertia reel" part that locks the belt during a sudden stop etc is usually a...
Ehh, not the right time I suppose. Arguably I could have done a better job marketing it. My ad was appropriate for the community at large here...
