© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
BTW I took the relay that was not working correctly apart. I found that the relay would actuate but hang at deactivation because it was rubbing...
It's fixed. I now have in c1 I have pods down only parking lites c2 I have pod up and parking lot lites and lo beams on...
This is the diagram I am working from
Voltages on A & B are 12.25 volts Relay U c1 = 0 c2 = 0 c3= 0 Relay D c1 = 0 c2 = 10.87 c3 = 10.87 Yes the headlights are on in...
It looks like cleaning the ++ ends that attach to the battery positive post may be a fix. You might want to try it. bruce
YOU AREN'T GOING TO BELIEVE THIS..... I cleaned the power cable end on the battery side. These cables where screwed into the terminal. I put the...
I tested the connection in the following way. I took my pair of jumper cables and connected one end to the battery and the other end I took...
I will try what you said tomorrow morning. I'm losing my sanity over this.
Am I reading a short to ground? I disconnected both the A & B cables. I placed a probe on one of the PCB terminals and I read 1.5 volts. I tried...
I have no indications that power is going to the car. All lights, relays all everything is down.
Okay about using the system. I'm about ready to pull the PCB out of the car. Everything seems to have to go to the PCB to work. Unless you have...
I turned the on/off ground switch several times. I checked continuity from the battery ground terminal to the frame and I have it. I checked the...
Do I click on the quote of the current box to type text? I lost all power to the car. Battery checks good. I got 12 volts to terminal A & B. Ideas?
There is no *87a female terminal in relay "U" only 87 all 3 cases =0 Relay D c1=.15 c2= 9.45 c3 = 9.43
I think I messed up the system but here are the results. relay U c1 = 0 c2 = 0 c3 = 0 Relay D c1 = 10.25 c2 = 0 c3 = 0
Relay "U" c1= 0 c2=0 c3=0 Relay D c1= 10.35 c2= .05 c3=.06
NO change. Case 1 pods up no light and parking lights on Case 2 pods down, low beam headlights on, parking lights are on Case 3 pods...
fine, need an address of where you want it sent. I'll go and get it copied tomorrow and put it in the mail.
Just a thought but maybe I can bypass this mess. I could wire a relay in parallel with the high beam and low beam relays. When they actuate I...