© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I would say this was a witch hunt and a joint nailing of old and new world afficionados. The two valves are not real shuttle valves in the...
Now I got it. There are two shuttle valves mounted on my car. Normally they are only mounted on Swiss and US cars. These valves have a contact...
the lower photo is correct, the upper is mirrored
do you have any idea where the sending unit might be located?
is ok
So, seatbelt attached and tested and no change. Btw, the light only comes on on the first application of the brakes, if you pump the pedal...
Hi Bob, let us start from the beginning. I have this car for 10 years and I m absolutely familiar with the hydraulic system. The left lamp says...
the left one, look at my pic at post 8392
the left one, look at the pic at my post 8392
all checked fine. rev counter on low idle always on zero, engine cold, high pressure.
all is normal and checked ok
in the meantime I have a replacement made for the black plastic elastic ring by additive digital printing and it works fine. pics attached [ATTACH]
attached pic of my dash with the center red light on. I checked my brake pads and they are abt. 70 % ok and there are no cables attached. The...
it is not the handbrake, that is the light to the right and it works fine. The center light comes on, when I press the brake pedal and only for a...
Clear, thanx Ivan and boralogist. But how does it work? no cable, no sensor plate, new pads are bland.
Hi everybody, on my Khamsin # 404 there are three rectangular red warning lights. The left one says STOP for obvious reasons, the right one says...
sorry, Marc. There is nothing visible on the bellhousing, at least not without major surgery, and on the block there is only a riveted number,...
no, ARA
Marius, that's the one. Nothing to find in the web. On my one the small black plastic ring holding and guiding the mirror ball-base is broken....
quite right Walter. Do you happen to know maker and possible availability?