© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Is the major on the 360/430's pretty DIY friendly.. It seems that from these photos the 430 is MUCH more DIY friendly than the 355/348's... Am i...
Thanks guys! I didn't even know that this was an option for head repair..
This was a while ago, but how did you guys fix the threads in the head? is that helicoil inside the head? i though you could not helicoil the...
Even if you don't plan on ever removing the clear bra, you should wait a mont or two. The paint takes a while to Fully cure, and will "off gas"...
Thanks guys!
Erik, I am going to guess that motor will need new gaskets/seals as well. it might be a good idea to replace the forward main seal/rear main seal...
I did not ask my question concisely enough, were did you get the angle gauge that you guys were using on the head bolts? That looks like a much...
The above explanation, without a formal education one possibly does not have the education to fully understand the way the systems work together....
Depends on if you ever plan on removing the Bra, the glue that is used with the clear braw is not friendly to non-factory paint. The glue WILL...
if you have any other concerns. just bring the car over to Richardson, I'll take it for a spin and tell you what's up... (Can't blame me for...
Where did you guys get the degree wheel from? do you have a link by any chance?
Good point, this is the ONLY good point i have ever seen as far as letting a car idle for a couple minutes... However, i don't really let my cars...
I would ask you this, of those owners you talked to, how many of them were engineers? i would bet they were doing it, because "someone" told them...
I would disconnect the temp sensor and blow off the connecting pins throughly with some compressed air, ensure that nothing is shorting the pins....
I hope it works out as well for you as is advertised. Wish you the best of luck man!
I think in this specific situation it would not have been in bad taste to educate the woman. She obviously had no idea the grander of her...
I think this would have been an apporiate situation to tell her the cost of the car... "you do realize this is a 200,000$ car right?" (or what...
nonono 125 10X hard stops with no cooling down would cook your brakes... Bedding-in Club Race or Full Race Pads "We typically recommend a set of...
Wouldn't you be able to do this adjustment while having the car in the air? you could easily verify the shifting action after each adjustment,...
