Jump start procedure for 360? | FerrariChat
Buy

Jump start procedure for 360?

Discussion in 'Technical Q&A' started by 348SStb, Oct 31, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 348SStb

    348SStb F1 Rookie
    Owner

    Apr 9, 2004
    2,991
    Palm Beach County, FL or Nassau County, NY
    Full Name:
    Dave
    #1 348SStb, Oct 31, 2006
    I would have loved doing a search or multiple searches, but apparently the search tool is very slow tonight. I can't seem to be able to search for anything!

    Anyway, I did read one horror thread saying that jump-starting the 360 is a big no-no. Is this true?

    Basically, I need to know the proper way to jump start the 360 if there is such a way. I was told by my Dad to use the access in the front of the passenger footwell, but then again I can't rely on his Ferrari knowledge!

    Thanks guys.
     
  2. davehelms

    davehelms F1 Rookie

    Jan 3, 2004
    4,629
    Full Name:
    Dave Helms
    #2 davehelms, Oct 31, 2006
    Either that or behind the drivers seat (4 phillips screws). I find the one behind the seat to be safer as there is less to short the postive cable on. I would hook the cables up and let it charge for 20-30 mins before attempting a start. Computers dislike high and low voltages and sparks. Start without touching the throttle and with climate control off and let it idle 10 mins before touching the throttle or putting any load on the engine in any way.

    Dave
     

Share This Page