348 steering wheel | FerrariChat
Buy

348 steering wheel

Discussion in 'Ferrari Discussion (not model specific)' started by 348 Turbo, Jul 27, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 348 Turbo

    348 Turbo Formula 3

    Jul 17, 2002
    1,837
    #1 348 Turbo, Jul 27, 2004
    Does anyone know which momo model is the 348 steering wheel? Can I just swap mine out with a specific model of momo wheel and have it just "bolt staight in"?
    My leather has a small split in it and I think it might be cheaper to just buy the new wheel and do a replacement. If I have to buy it staight from Ferrari, it won't be worth fixing. It is just a small split in the seam.
    Thanks in advance.
     
  2. Tal

    Tal Rookie

    Nov 5, 2003
    17
    Midlands UK
    Full Name:
    Tal Withington
    #2 Tal, Jul 27, 2004
    I swapped my 348 wheel out for a Momo Monte Carlo it bolted straight on.
    You can even pop the badge out the front and it fits into the center of the wheel.
     
  3. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,464
    Winston Salem, NC
    #3 Ricambi America, Jul 27, 2004
    Tal -

    Momo has a 320mm and a 340mm wheel. Since my car is safely tucked away in the garage this morning, do you recall offhand which one is the right size? My best guess would be 320mm, right? At $150, that's a decent price I suppose.

    -Daniel
     
  4. kenyon

    kenyon F1 Rookie

    Oct 7, 2002
    2,837
    East Yorkshire
    Full Name:
    Justin Kenyon
    #4 kenyon, Jul 27, 2004
    Any MOMO steering wheel fit onto the existing 348 MOMO steering boss.
    I have a 300mm MOMO CORSA wheel.
     
  5. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,931
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #5 Steve Magnusson, Jul 27, 2004
    Daniel -- Just measure the OD of what you've got and match it if that's what you want. I've got a 320mm (jpeg below) and even those unfamiliar with F recognize it as "a little smaller than typical" -- and kenyon's 300mm even more so. ~350mm is the more typical size IME, but I'll probably always go 320ish -- it's just personal preference. $150 is an excellent price value for a MOMO st. wheel IME.

    One thing I'd add is that on the pre-air bag cars it is so easy to swap these out that many cars have already been changed at least once so there's a lot of variation out there.
     

Share This Page