328 lower lens set on ebay | FerrariChat
Buy

328 lower lens set on ebay

Discussion in '308/328' started by jrinehart, Apr 8, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jrinehart

    jrinehart Formula Junior

    Jan 30, 2009
    578
    Chambersburg, PA
    Full Name:
    John Rinehart
    #1 jrinehart, Apr 8, 2009
    There is a set of 328 fog lights on EBAY. They say the lens is cast polymer with original Carello markings They state the rock chips will not crack it. I don't know how to put the link into my post but I just went to Ebay and searched Ferrari 328 and then sorted it by earliest listing. The buy it now price is $647 and they have a 100% feedback. Sounds and looks like a good idea. I have ordered the 40 mil film from Lamin-x for mine but nice to know there is an alternative if something happens to them.
     
  2. Mule

    Mule F1 Rookie
    Owner Rossa Subscribed

    Jun 25, 2003
    3,758
    Alaska
    Full Name:
    Mule
    #2 Mule, Apr 8, 2009
    The price is fair, but the issue is the technique to replace them. The old lens must be broken out or drilled out, which means sacrificing it. Many have tried, but the easy way is not out there yet. Worth it if your old lens is completely shattered out, because that is the starting point to replace them.
     
  3. JV's89

    JV's89 F1 Veteran
    Owner Rossa Subscribed

    Jul 18, 2006
    7,294
    Pittsburgh, PA
    Full Name:
    John
    #3 JV's89, Apr 9, 2009
    Last edited: Apr 9, 2009
    They're the same ones I have. I can't tell the difference between them and OEM. They're made by Squadra Nuvolari (sp?).
     
  4. Mule

    Mule F1 Rookie
    Owner Rossa Subscribed

    Jun 25, 2003
    3,758
    Alaska
    Full Name:
    Mule
    #4 Mule, Apr 9, 2009
    Did you install them? Any hints?
     
  5. JV's89

    JV's89 F1 Veteran
    Owner Rossa Subscribed

    Jul 18, 2006
    7,294
    Pittsburgh, PA
    Full Name:
    John
    #5 JV's89, Apr 9, 2009
    No. I needed the entire light assemblies, including the housings, so they put them together for me. The housings are apparently in very short supply as no one is reproducing them yet.
     
  6. Mule

    Mule F1 Rookie
    Owner Rossa Subscribed

    Jun 25, 2003
    3,758
    Alaska
    Full Name:
    Mule
    #6 Mule, Apr 9, 2009
    Thank you.
     
  7. JV's89

    JV's89 F1 Veteran
    Owner Rossa Subscribed

    Jul 18, 2006
    7,294
    Pittsburgh, PA
    Full Name:
    John
    #7 JV's89, Apr 9, 2009
    No problem. You should give Tony at Squadra Nuvolari a call.
     
  8. chrmer3

    chrmer3 Formula 3

    May 19, 2006
    1,719
    USSA
    Full Name:
    Chris
    #8 chrmer3, Apr 9, 2009
    You can get the glass lens out without breaking. I did it on my first try. I made a post 2 weeks ago how to remove. I installed the polymer lens in place of my rock pitted glass ones. Takes a hour of patience and sharp x-acto knives. They just held in with a Bead of adhesive caulk.
    Chris
     
  9. Mule

    Mule F1 Rookie
    Owner Rossa Subscribed

    Jun 25, 2003
    3,758
    Alaska
    Full Name:
    Mule
    #9 Mule, Apr 9, 2009
    Great write up and directions. Gives me the optimism to give it a try. Thank you.
     

Share This Page