Wiper Question, Clapper Type | FerrariChat

Wiper Question, Clapper Type

Discussion in '206/246' started by sranderson, Sep 22, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sranderson

    sranderson Formula Junior

    Nov 15, 2003
    286
    Full Name:
    SRA
    Hello All,

    I'm having trouble timing my wipers. They are the clapper style, and before I go too far, I want to confirm I have the proper arms and blades.

    Can anyone please give me the overall length of the arms and blades.

    Thanks,

    Steve
     
  2. celestialcoop

    celestialcoop Formula Junior
    Silver Subscribed

    Mar 20, 2006
    715
    Full Name:
    Coop
    #2 celestialcoop, Sep 23, 2008
    Last edited by a moderator: Sep 7, 2017
    Steve,
    I'll measure the black Arman clappers on my type "E" Euro GT. I don't know if they are the same spec as the chrome ones on your car. It'll be about four hours before I can get to it; you'll likely have some response from your fellow "L" owners by then, but I'll send you the info anyway...for comparison.

    There was a thread, not too long ago, that listed the various blade lengths based on country of original delivery. I have a copy of the Bodywork Spare Parts Catalog 52/71, for use from car n. 02132, that shows the blades (by part #, not size) for specific markets. Does catalog 30/69 have similar info for the early cars?

    As for the timing, make sure that the blades are parked level & parallel with each other, with the pax side tangent to the windscreen rubber gasket. The driver's side will sit several inches above the pax side...kinda far up on the glass. I tried to reduce the distance/lower the driver's side for a little less cluttered look & they hit when operating. You can see that I have real short blades, too. Oh well.

    I'll be back with some measurements,
    Coop
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  3. Italian Lover

    Italian Lover Formula Junior

    Oct 26, 2006
    553
    Full Name:
    Italian Lover
    Steve, take a look in the thread by John Corbani "Dino Saga 080821 Sunny Afternoon" where I happened to post few pics of my 1969 black Dino 246GT #00508 Tipo L. If you take good look and compare mine against Coop's, they're not the same. I cannot guarantee that mine is original and same as yours but for your info, here's the measurements: arms' 41.5cm/ 16.5in. and blades' 38cm/ 15in. Hope this helps. w/ smiles Jimmy
     
  4. celestialcoop

    celestialcoop Formula Junior
    Silver Subscribed

    Mar 20, 2006
    715
    Full Name:
    Coop
    #4 celestialcoop, Sep 23, 2008
    Last edited by a moderator: Sep 7, 2017
    Good Afternoon, Steve.
    A bit late, but here are the numbers: Arms are 16.5" from 'eye' to tip, blades are 13" from tip to tip. Both are Arman&Co.

    Good Morning, Jimmy.
    I took the liberty of attaching one of your pics from John's Saga; I've added one more shot of my car. The arms are slightly different, but are definitely related. The blades, however, are definitely not kin.

    As I understand it, the 206 & early 246 chrome wipers are the same, so I'll pick up my marbles and go home. :)

    Good Luck!
    Coop
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  5. Italian Lover

    Italian Lover Formula Junior

    Oct 26, 2006
    553
    Full Name:
    Italian Lover
    You did all the work for me, Coop. Thanx ! w/ smiles Jimmy
     
  6. sranderson

    sranderson Formula Junior

    Nov 15, 2003
    286
    Full Name:
    SRA
    Thanks Guys.
     
  7. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,745
    26.806311,-81.755805
    Full Name:
    Dave M.
    There's also a tech bulletin on this.

    I have it on my work PC, I'll post it tomorrow, it has drawings for how to properly align the blades.

    DM
     

Share This Page