Sensor hookup from stock gauges (Traqmate) | FerrariChat
Buy

Sensor hookup from stock gauges (Traqmate)

Discussion in 'Other Racing' started by enjoythemusic, Jul 8, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. enjoythemusic

    enjoythemusic F1 World Champ

    Apr 20, 2002
    10,676
    Worldwide
    Full Name:
    Steven
    #1 enjoythemusic, Jul 8, 2006
    Last edited by a moderator: Sep 7, 2017
    Ok, just ordered the full Traqmate system and full input part. My questions are:

    Ok, ground is common so no need to drag that off each of the car's tach, speedo, OP, OT, WT. But am not sure about if i need to use a (suggest for some things) 470 Ohm resistor. Can i just grab (split wire) the analog positive electrical signal straight off each of the 1985 308GTS's dash gauges and hook them to the Traqmate's input?

    Please see below PDF for detailed instruction from Traqmate. Many thanks as ALL help is ALWAYS appreciated.
    Image Unavailable, Please Login
     

Share This Page