Glove box gas strut that actually works? | FerrariChat
Buy

Glove box gas strut that actually works?

Discussion in '348/355' started by Tom_C, Oct 23, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tom_C

    Tom_C Karting

    Feb 20, 2008
    233
    Raleigh area, NC
    Full Name:
    Tom C
    #1 Tom_C, Oct 23, 2008
    Based on the searching I have done, it appears that even a new glove box strut won't hold the door in the up position, even when brand new. This is driving me crazy....
    Has anyone found or done anything that would work? Even the same type thing as the radio cover, which stays up fine even though I haven't figured out how?
     
  2. davehelms

    davehelms F1 Rookie

    Jan 3, 2004
    4,629
    Full Name:
    Dave Helms
    #2 davehelms, Oct 23, 2008
    I did a few that looked just like a coil over shock on the suspension. A little spring assist seems to hold up for years. Sounds like a job for Verell.
     
  3. dasadrew

    dasadrew Formula Junior

    Aug 1, 2004
    683
    Germany
    Full Name:
    Drew H.
    #3 dasadrew, Oct 23, 2008
    Replaced mine with a brand new one about three years ago. I bought two at the time due to all the horror stories, thinking I´d be swapping it out 6 months later. Well, it´s still in there and doing its job fine!
     
  4. BobH

    BobH F1 Rookie
    Silver Subscribed

    Nov 8, 2003
    3,164
    Morristown, NJ
    Full Name:
    Robert H
    #4 BobH, Oct 23, 2008
    I purchased a new lift support about a year ago from LiftSupportDepot.com, item number SG437001. It is still working, although I never really go into the glove box . I can't vouch if it will hold up in a high traffic situation but so far so good. Total tax and shipping was about $50.
     
  5. GQ IMAGE

    GQ IMAGE Formula Junior

    Feb 10, 2005
    322
    PA
    Full Name:
    GQ IMAGE
    #5 GQ IMAGE, Oct 23, 2008
    Put a new one in 4 years ago, and works perfectly.
    GQ
     
  6. Tom_C

    Tom_C Karting

    Feb 20, 2008
    233
    Raleigh area, NC
    Full Name:
    Tom C
    #6 Tom_C, Oct 24, 2008
    So it sounds like that about half the folks parts work when they arrive and hold the box up, and the other's don't (past threads). Guess I might as well throw $50 at it and see (cancel my drinking fund for the weekend, and its a wash...:)). Thanks for the replies about the ones working properly, that gives me hope. :)
     
  7. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #7 Verell, Oct 28, 2008
    Not having a 348 handy, could someone post a couple of pix so I can see what we're talking about?

    Of course, now that you've got a spare one, everythingn else will fail, but not that strut. ;^)
     
  8. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,045
    USA
    #8 f355spider, Oct 28, 2008
    It would be nice if there was a source for all the Stabilus/Sachs gas strut technical information, with lengths, end terminals and pressure specs, then one could simply order a similar sized unit with more gas pressure....but that would be too easy! ;)
     
  9. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,958
    MD and NE
    Full Name:
    Robbie
    #9 285ferrari, Oct 28, 2008
    Glovebox struts? Damn 348 guys... Us 355 guys can open ours manually, no need for a sissy strut...:D
     
  10. Tom_C

    Tom_C Karting

    Feb 20, 2008
    233
    Raleigh area, NC
    Full Name:
    Tom C
    #10 Tom_C, Oct 28, 2008
    :) Give me a few more miles manhandling the steering wheel at low speeds and I won't need it either... :) No power steering pantywaist here... :D:D

    Got my new strut in today, and it does indeed hold the glove box open, but also seems pretty weak, as a pretty light tap on the box will make it fall. I also found the old strut was kind of frozen, and wouldn't pop back out at all when compressed. BUT, after a spray with WD40 and several (20-30) compressions, it seems to be working the way it should now. I didn't put it back in the car, but it was strange that just exercising it seemed to free it up.
     

Share This Page