Fabspeed Ferrari 599 2ndary Catbypass Pipes Special! | FerrariChat
Buy

Fabspeed Ferrari 599 2ndary Catbypass Pipes Special!

Discussion in '612/599' started by Alex@fabspeed, Aug 17, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Alex@fabspeed

    Alex@fabspeed Formula Junior

    Dec 6, 2006
    401
    Fort Washington, PA
    #1 Alex@fabspeed, Aug 17, 2011
    Ferrari 599 Secondary Catbypass pipes are available!! Retail price on Fabspeed.com. 5% discount to all members. PM or email me for pricing or if you have any questions.

    • Fits all Ferrari 599 GTB Fiorano 2007+
    • Saves 16.1lbs/7.3kg from under the vehicle.
    • Projected power gain +20HP on the Enzo V12 engine.
    • Replaces the OEM 2ndary 500 cell, unnecessary restrictive catalytic converters for increased exhaust flow and power.
    • No Check Engine Light.
    • High quality 14 gauge T304 stainless steel, C.N.C. mandrel bent tubing.
    • Dramatically improved horsepower, throttle response and unique sportscar sound.
    • Simple, Bolt-on installation with all hardware included.
    Fabspeed new 599 2ndary catbypass pipes replace the OEM 2ndary catalytic converters to increase overall power and save weight. The Ferrari 599 has 2 sets of catalytic converters on the exhaust and by bypassing the 2ndary unnecessary set, you will increase power and sportscar sound, while saving weight at the same time. So why not eliminate a set to improve the responsiveness of the car and still comply with emissions and warranty. Fabspeed bypass pipes are made from 14 gauge, T304 stainless steel and mandrel bent tubing for ultimate flow and durability.

    Fabspeed 2ndary catbypass pipes are a direct replacement fit just like OEM. For more power and a more enjoyable sound, Fabspeed offers a Maxflo Valvtronic Muffler and BMC Air Filters for better engine air flow.

    Please feel free to check out our website, Fabspeed.com for more products for your 599. We are the premier East coast distributor and tuning center for EVOMSit software and have an ECU upgrade available for your 599.

    Ferrari 599 Catbypass Explanation Video

    FABSPEED IMAGES:


    [​IMG]


    [​IMG]
     
  2. Tipo815

    Tipo815 F1 Rookie

    Nov 1, 2003
    3,565
    Newport Beach, CA
    Full Name:
    Jeffrey
    #2 Tipo815, Aug 17, 2011
    Alex - Send me a PM with price. Thanks!
     
  3. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #3 coupe1, Aug 17, 2011
    Can anyone post a sound clip of the 599 with oem exhausts but with Fabspeed bypass cats?

    Thanks
     
  4. Alex@fabspeed

    Alex@fabspeed Formula Junior

    Dec 6, 2006
    401
    Fort Washington, PA
    #4 Alex@fabspeed, Aug 18, 2011
    Tipo815- PM Sent

    Coupe 1- I had a customer who recently did them and is supposed to send me a video, so I don't have anything right now. Let me know if anyone of you are interested in doing a video for us and I will offer you a deeper discount.

    Thanks,
     
  5. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #5 coupe1, Aug 18, 2011
    A sound clip might sway a lot of interested parties out there. I am thinking an OEM exhaust with valves with the secondary bypass cats. At low rpms will sound a little louder but when you drop a gear or two (and valves open), it will really scream. But still within tolerable limits. I had a friend who did this set up on his Scud and it was better than any exhaust mod. But for those who want a loud setup, the bypass cats + rear box exhaust will really rock!
     
  6. baron

    baron Karting

    Nov 2, 2003
    92
    #6 baron, Sep 4, 2011
    I just had similar straight pipes installed into a 599 HGTE with Tubi mufflers. I took video yesterday. I'll see if I can upload the video later.
     
  7. Fiorano57

    Fiorano57 Formula 3
    BANNED

    Dec 23, 2010
    1,689
    #7 Fiorano57, Sep 4, 2011
    My 07 599 has the Fabspeed secondary cat straightpipes with the factory mufflers and it sounds great(I think so)...I also plugged the vac. hoses to each muffler so now the valves stay open too...Sounds sweet when you get on it going through a tunnel or underpass..No drone and not obnoxious.
    Iam sorry but I dont have a way to make a sound clip.:(
     
  8. Alex@fabspeed

    Alex@fabspeed Formula Junior

    Dec 6, 2006
    401
    Fort Washington, PA
    #8 Alex@fabspeed, Sep 7, 2011
    Thanks for the feedback guys, I have someone on Fchat you just purchased a set and will be doing a nice HD video for me, so I will be posting that as soon as its done. I will keep everyone posted and let me know know if you have any questions. We also have Maxflo Valvetronic Mufflers for the 599 and are looking for someone to also do a nice Video for us on that. PM me if anyone may be interested.
    thanks,
     
  9. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #9 coupe1, Sep 8, 2011
    Waiting for that vid! Yr pipes + Oem mufflers
    I should think it will sound louder than stock at idle and low speeds
    and ripping loud with deep grunt at higher rpms
    yeah,,that's my wish list
     
  10. baron

    baron Karting

    Nov 2, 2003
    92
    #10 baron, Sep 9, 2011
    I have a video of a 599 with Tubi Exhaust and Secondary Cat Bypass (not the same one as in this thread but similar).

    http://youtu.be/exdN2qLhfVs

    Sounds pretty good and we didn't even go to very high RPMs.
     
  11. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #11 coupe1, Sep 11, 2011
    Sounds pretty good. How does the tubi sound compared to oem?
    With the fabspeeds installed, does it sound higher pitch at 4 to 6k rpm compared to oem?
     
  12. baron

    baron Karting

    Nov 2, 2003
    92
    #12 baron, Sep 13, 2011
    The Tubi is a little louder than OEM but I think the tone is basically the same. I actually don't have fabspeed bypass, but the design is same anyway. At 4-6k rpm, it just becomes louder, and more raw sounding, but not necessarily higher pitch. Now, I like crusing around at low speeds more (1st to 3rd) gear, with more rumble.
     
  13. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #13 coupe1, Sep 20, 2011
    Alex, any updates on that vid from your customer?
     
  14. Alex@fabspeed

    Alex@fabspeed Formula Junior

    Dec 6, 2006
    401
    Fort Washington, PA
    #14 Alex@fabspeed, Sep 21, 2011
    Customer should be installing them with his factory mufflers this week so I hope to see a nice HD video soon. Im excited to hear it also and get a video for our website.
     
  15. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #15 coupe1, Sep 22, 2011
    That's great to hear!
     
  16. ted 191

    ted 191 Karting

    Sep 6, 2005
    225
    yorkshire
    Full Name:
    chris heeley
    #16 ted 191, Oct 18, 2011
    I have installed tubi bypass and their rumor, loud back boxes. The sound outside the car is fantastic, but inside between 2.5k and 3.5k is a horrible drone that hurts my ears so they will have to go. I want to keep the bypass pipes and re fit the standard back boxes, is it possible to manually open/close the valves on the back boxes ? Where is the electrical solenoid that controls these valves.
     
  17. coupe1

    coupe1 Formula 3

    Jan 15, 2007
    1,469
    Singapore
    #17 coupe1, Oct 18, 2011
    so sounds like bypass pipes and OEM mufflers are a good mix. How's the sound when the car is idling and when you pull it thru the gears?
     
  18. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie
    Sponsor

    Feb 5, 2009
    3,135
    Fort Washington, PA
    Full Name:
    John S
    #18 Fabspeed Motorsport, Feb 23, 2012
    Hello Guys,

    I just wanted you to know that we have adjusted our pricing on these pipes due to our ability to more efficiently fabricate them. Please PM me for the new price or if you have any questions. Thanks!

    Jeff
     
  19. steve599

    steve599 Rookie

    Mar 30, 2013
    7
    #19 steve599, Apr 5, 2013
    Any documentation on the power increase?
     
  20. steve599

    steve599 Rookie

    Mar 30, 2013
    7
    #20 steve599, Apr 5, 2013
    Any documentation on the power increase?
     
  21. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie
    Sponsor

    Feb 5, 2009
    3,135
    Fort Washington, PA
    Full Name:
    John S
    #21 Fabspeed Motorsport, Apr 5, 2013
    We haven't had a chance to dyno a car with these bypass pipes, but the feedback we get is 100% positive.. bit with the power increase and sound. Please let me know if you have any other questions or if you want to order a set. Thanks!

    Jeff
     

Share This Page