Replacing under hood foam | FerrariChat
Buy

Replacing under hood foam

Discussion in '308/328' started by EZORED, Oct 23, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. EZORED

    EZORED Formula 3
    Silver Subscribed

    Nov 24, 2007
    1,039
    Scottsdale, AZ
    Full Name:
    Dennis
    #1 EZORED, Oct 23, 2015
    Last edited by a moderator: Sep 7, 2017
    The foam strips that attach to the bonnet, on my 78 GTS are gone. I bought replacements from GT Car Parts in Phoenix. My problem is the lower one which is sandwiched between the hood and the radiator is a weird triangular piece. Can some one take a picture of an original as I would like to determine the correct orientation. Thanks Dennis
    Image Unavailable, Please Login
     
  2. david

    david Formula Junior

    Feb 21, 2001
    810
    Northwest
    Full Name:
    david
    #2 david, Oct 25, 2015
    I'm too lazy to go out and take a picture. But if you take the foam as it's oriented in the picture and rotate it clockwise, you will have it correct for mounting on your hood. In other words, the side that is lying on the newspaper faces the back. The side that is on the left in the picture is the side that gets glued to the hood. The blunt short edge faces the front of the car. I hope that helps. If not, maybe one of the less photographically challenged members will chime in. Also here's a link to a thread where a bunch of people chime in...

    308 Hood Foam - FerrariChat.com
     

Share This Page