05 612 seat removal | FerrariChat

05 612 seat removal

Discussion in 'Technical Q&A' started by tiara4300, Sep 16, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tiara4300

    tiara4300 Formula Junior

    Feb 27, 2005
    650
    miami ,fl.
    Full Name:
    Adam
    I need to remove front seat in my 612 ( wet carpet) I found the seat bolts but there is one bolt under the track with seat all the way forward,any ideas thanks
     
  2. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    9,727
    I know on my Ferrari, the tracks come out with the seats still attached. That is you unbolt the tracks and pull the seat from there.
     
  3. ar4me

    ar4me F1 Rookie
    Owner

    Apr 4, 2010
    3,114
    Southern California
    Full Name:
    Jes
    How did you get to that bolt...?
     
  4. ar4me

    ar4me F1 Rookie
    Owner

    Apr 4, 2010
    3,114
    Southern California
    Full Name:
    Jes
    Never mind - went a different route, not requiring removal of seat.
     
  5. brogenville

    brogenville Formula 3
    Rossa Subscribed

    Apr 24, 2012
    2,265
    UK
    Full Name:
    Robin
    Old thread revival... anyone got any clues as to how to get to the hidden bolt at the rear of the outside track? Seat all the way forward, but you can’t access the last (5th) bolt.

    Same on both sides, so I assume there’s no problem with my seats not going fully forward.
     
  6. brogenville

    brogenville Formula 3
    Rossa Subscribed

    Apr 24, 2012
    2,265
    UK
    Full Name:
    Robin
    Figured it out. For anyone else out there, you may find that the seat runners have little cleats clipped over the top of the lower runner track at the front. These act to limit the forward travel of the seat. You need to pop these both out in order to let the seat travel forward enough to get at the last bolt at the back.
     
    Mike Morrissey likes this.

Share This Page