1/12 250GT Breadvan 3D Project | FerrariChat
Buy

1/12 250GT Breadvan 3D Project

Discussion in 'Collectables, Literature, & Models' started by PeterWPro, Oct 7, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #1 PeterWPro, Oct 7, 2016
    Last edited by a moderator: Sep 7, 2017
    It has been a year or more since I have been able to work on this project. At this stage I have done the base coat, livery and a clear scratch coat on the 3D printed body that I developed along with a chap in the Netherlands. The chassis in the photos is only to see how the chassis will fit and to determine the location of the motor which will be pushed back towards the firewall as it was on the original car.

    The base kit is a Model Factory HIRO 1962 GTO kit and will feature a scratch built interior
    and modified chassis. This is a one off spec project.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. gt4me

    gt4me F1 Veteran

    Sep 10, 2005
    5,671
    UK
    Full Name:
    Lewis Mitchell
    #2 gt4me, Oct 7, 2016
    Looks great so far.
     
  3. Christian.Fr

    Christian.Fr Two Time F1 World Champ

    Jun 9, 2005
    21,613
    Full Name:
    Christian.Fr
    #3 Christian.Fr, Oct 7, 2016
    Not my favorite, but I will have a look on this work
     
  4. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,485
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #4 F1tommy, Oct 7, 2016
    Last edited by a moderator: Sep 7, 2017
  5. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #5 PeterWPro, Oct 7, 2016
    Thanks...great photos. This will help a lot. I did have a dash printed that is very close to the original.
     
  6. tomgt

    tomgt F1 Veteran
    Rossa Subscribed

    Feb 22, 2004
    7,166
    Netherlands
    Full Name:
    Tom Wiggers
    #6 tomgt, Oct 7, 2016
    Sebastiaan Pot did a wonderfull job!
     
  7. PeterWPro

    PeterWPro Formula Junior

    Nov 6, 2015
    685
    Florida
    Full Name:
    Peter
    #7 PeterWPro, Oct 11, 2016
    Last edited by a moderator: Sep 7, 2017
    Yes...with the exception of the front fenders which ended up too flat. I had to add material and re shape them. Otherwise he did a nice job on the body shell.

    I am also working on a full detail BMW M1 that he created in 3D for me based on a Clients car. Again nice work but the engineering fell short structurally [I have had to add reinforcing and remake some parts that tend to warp because they were way too thin].The material is very brittle and difficult to manage. All things considered it is coming along nicely.
    Image Unavailable, Please Login
     

Share This Page