1/12 models (Tamiya/Kyosho/Autoart) | Page 4 | FerrariChat
Buy

1/12 models (Tamiya/Kyosho/Autoart)

Discussion in 'Collectables, Literature, & Models' started by mattymouse33, Apr 24, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 4 of 66
  1. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #76 mattymouse33, Jun 21, 2006
    I doubt it. Since you have to import it, it'll cost you to send back etc etc. If something does break, it'll more than likely be something relatively minor however on my 1st of 3 model, the bonnet protuded up about 3mm when meant to be closed (it just looked crap), also the rear tailgate just wobbles about all over the place (i think its just the way it is), there were other things but they were sort of fixable.

    Are you sure there is no model importer for you. Have you checked Tamiyas website, I'm sure it lists importers for different countries?

    Think you're besy bet if speaking to someone on this site like Michael (SLK99) who may be able to check one beforehand then sell to you. At least he knows what to look out for and can check the major things like fitting. Then anything that falls off in the post will be relatively minor.

    Regards,

    Matthew
     
  2. Lukas

    Lukas Formula Junior

    Dec 28, 2003
    341
    Santa Barbara
    Full Name:
    Lukas A. Niklasson
    #77 Lukas, Jun 21, 2006
    Thanks for your reply. Is there some usual places (that breaks etc) i should look out for on the Enzo?

    How is the Carrera GT 1:12 by Tamiya? Hopefully that one isnt as fragile?

    Thanks
     
  3. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #78 slk99, Jun 21, 2006
    Hey Matt....

    you bring me up......

    so..... what I can help....

    Mike
     
  4. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #79 mattymouse33, Jun 22, 2006
    Just thinking you have some good but relatively inexpensive contacts who may be able to check the major parts of the Tamiya Enzo before sending across to Sweden. At least that way, he knows it fits together well and any breakages or things falling off in transit can easily be fixed.


    Any new pics of you know what?

    Regards,

    Matthew
     
  5. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #80 mattymouse33, Jun 22, 2006
    With the GT, I certainly didnt have the troubles that i had with the Enzo although i would say that the Enzo looks far better. The GT is quite a long and narrow model so its proportions although most likely correct just look strange.
     
  6. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #81 slk99, Jun 22, 2006
    If I can help, I am ok to do that....

    No new pics, I am decorating my showroom right now...
     
  7. Lukas

    Lukas Formula Junior

    Dec 28, 2003
    341
    Santa Barbara
    Full Name:
    Lukas A. Niklasson
    #82 Lukas, Jun 22, 2006
    Well i will probably order my model from a seller in Hongkong, its about 280usd + shipping... but im just abit worried it wont be perfect when it arrives.
    Well i will let you guys know :) in the meantime im waiting on a Carrera GT 1:12 to arrive!

    Thanks again
     
  8. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #83 slk99, Jun 22, 2006
    The price 280USD is a fair price, even with my connection, I get the same price or close....


    how much did he charge for the postage?

    For some reference to check whether the postage is being overcharged or not....

    I have shipped a black Enzo to Denmark via EMS (3-5days) for about 52USD.

    So, if you paid not more than 330USD, it is a fair deal.
     
  9. Lukas

    Lukas Formula Junior

    Dec 28, 2003
    341
    Santa Barbara
    Full Name:
    Lukas A. Niklasson
    #84 Lukas, Jun 22, 2006
    Interesting! Twice when i have bought my models (Carrera GT and F50) I have paid 86usd and 99usd for shipping.

    Ps i sent you a PM.
     
  10. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #85 slk99, Jun 22, 2006
    The seller is making profit on the postage instead on the car....
     
  11. Greg G

    Greg G F1 Rookie

    Jul 5, 2003
    3,902
    northern New Jersey
    #86 Greg G, Jun 22, 2006
    So where can the best deals be found for buying a Tamiya CGT? I am located in the USA. Thanks!
     
  12. Lukas

    Lukas Formula Junior

    Dec 28, 2003
    341
    Santa Barbara
    Full Name:
    Lukas A. Niklasson
    #87 Lukas, Jul 13, 2006
    How is the interior on the Enzo? Is it like real leather, or plastic or what? Thanks
     
  13. XP1LM

    XP1LM Formula Junior

    Nov 28, 2005
    738
    Montreal
    Full Name:
    Truong
    #88 XP1LM, Jul 13, 2006
    does the Carrera GT 1/12 has other color than silver?
     
  14. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #89 slk99, Jul 14, 2006

    Nope.
     
  15. Lukas

    Lukas Formula Junior

    Dec 28, 2003
    341
    Santa Barbara
    Full Name:
    Lukas A. Niklasson
    #90 Lukas, Jul 14, 2006
    Did you get my last pm?
     
  16. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #91 slk99, Jul 14, 2006
    ?
     
  17. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #92 mattymouse33, Jul 14, 2006
    Plastic unfortunately. Best interiors i've came across are autoarts
     
  18. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #93 mattymouse33, Jul 25, 2006
    So we all sit here eagerly awaiting some new 1/12 models to be released, anyone got dates for the following?

    AA Gallardo
    AA Murcielago Roadster
    Kyosho Enzo

    Any others i may have missed?

    I cant handle life without more 1/12's sitting on my shelves
     
  19. ferrariguy

    ferrariguy Formula Junior

    Aug 17, 2002
    610
    Victoria, BC Canada
    Full Name:
    Lawrence Yee
    #94 ferrariguy, Jul 25, 2006
    Hey Matthew,

    How about this one?:

    McLaren F1 Roadcar
    1994 Mercedes in Silver
    Production will be extremely limited
    1:12 Scale by Minichamps
    #530133129

    due out: 2nd qtr 2007

    You can find a couple of pics at:

    www.tomotorsports.com
     
  20. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #95 slk99, Jul 26, 2006
    Last edited by a moderator: Sep 7, 2017
  21. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #96 mattymouse33, Jul 26, 2006
    So they are re-releasing the F1? Interesting!
     
  22. mattymouse33

    mattymouse33 F1 Rookie

    Oct 25, 2004
    4,632
    We'll set aboot ye!
    Full Name:
    Matthew
    #97 mattymouse33, Jul 26, 2006
    1/12 348? What news do you have on that?

    Any news on the 6.0?
     
  23. slk99

    slk99 Formula 3

    Jun 8, 2004
    1,425
    #98 slk99, Jul 26, 2006
    Good eyes... yes, correct....


    um... 6.0... that's annoying ... no news yet......... don't know if it has halted again or not.........
     
  24. ferrariguy

    ferrariguy Formula Junior

    Aug 17, 2002
    610
    Victoria, BC Canada
    Full Name:
    Lawrence Yee
    #99 ferrariguy, Jul 26, 2006
    Actually, regarding the Maclaren F1 I don't think it's a re-release. I believe MC never did a silver one. Someone correct me if I'm wrong.
     
  25. Lukas

    Lukas Formula Junior

    Dec 28, 2003
    341
    Santa Barbara
    Full Name:
    Lukas A. Niklasson
    #100 Lukas, Jul 26, 2006
    I got a reply from Minichamp saying this:

    Thanks for your email

    This mclaren f1 gtr model will be made in 1\12 scale in silver due may 2007

    Thanks

    ---

    So it will be a F1 GTR then....interesting
     
Page 4 of 66

Share This Page