355 15mm spacers

Maybe the front needs a little bit more....

 

Did you roll your fenders? They're likely to catch on the front if you don't

 

I have 15mm spacers on my car. No fender rolling necessary

 

What's the widest spacer you can run without going to longer wheel bolts?

 

i did 11mm- 15mm and lowered a bit on this GTB, was gonna do 15mm all around which would be fine but i think when you lower the car a bit its safer to do 11mm in the front
Image Unavailable, Please Login

 

I concur with that. My cars had the hill engineering 15mm spacers with Hills extended bolts front and rear for 13 years. No fender rolling needed.

 

Do you use longer wheel bolts for the 11mm?

 

you use longer wheel bolts with both- ricambi sells all that stuff

 

What BOLT SIZE should be specified for adding 15mm spacers to stock 355 wheels? Hill sells spacers and bolts but requires the purchaser to specify bolt size. Would the bolt size be the threaded length of an original factory bolt plus 15mm for the spacer? Anybody been there, done that?

 

huh???

 

You should be fine with 67 mm bolts.

 

Thanks guys. Ordered H&R 15mm hub centric with longer bolts as advised. Will let you know how it turns out.