16" Hayashi 505's

I'm putting these up on here for you guys first before the ebay route, or parting them out.
2- 16x8 i measured the offsets as: back of wheel lip to mounting flange 4 3/4" , front of wheel lip to flange 3 1/2"
2- 16x9 back of wheel lip to flange 4 3/4" , front of wheel lip to flange 4 1/8"
5x108 hole circle
I put these on my 308 QV and offset looks good on mine, could go wider on tires if wanted on mine.
These wheels need restored and one of the front lips has curb rash on it. Also 3 of these wheels are the old style hayashi and 1 is the old style HRE which is slightly different spoke design. You can see it in pics. I have 3 center caps with only 2 of the mounting screws. The caps are fairly scratched up but could be buffed out i think. The tires on the wheels now are Yokahama A-008R in 205/55r16 and 225/50r16 , age unknown,should be replaced IMHO. The wheels could be restored or used as parts for your wheels, up to you. As all of you know they are rare in 5x108. I'm only selling these because i decided to get metric tires for my original wheels instead of restoring these. I would dismount the tires if you don't want for shipping purposes.

I would sell the caps seperate for $150 each + actual shipping
i would sell everything for $1000 + actual shipping
OBO

Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

Thanks For Looking

Joe



Sent from my SM-P905V using Tapatalk
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Thanks
I even thought about running them with no caps for that open lug track look. They would make for a nice set of track wheels.

 

Bump for the rarity.

Sent from my SM-P905V using Tapatalk