1981 308 GTSi rear boot/trunk floor panels

Hello from a warm and sunny Tenerife. Many years ago I bought a 308Gtsi on the internet from the US which has proved to be a big mistake! It had a few good points but a lot more very bad ones….

I am slowly working my way through endless issues and am now stripping out the area behind the engine, the floor areas have been badly repaired and missing in the LH and RH rear quarters.

Does anyone have any pictures of how the floor should look so I can try and make some correct panels to fit. Or obviously if there is anyone that actually produces new repair sections?

Any contacts or help would be very much appreciated.

Best David

 

Can you post pics of what you are working with in there now?

May I ask the chassis number?

 

Hi David and Welcome!
Don't have specifically what you're asking for, but here are some great threads that should help:
https://www.ferrarichat.com/forum/threads/79-308-restoration.4503/
https://www.ferrarichat.com/forum/threads/308-rear-trunk-restoration.192883/
https://www.ferrarichat.com/forum/threads/308-interior-resto-remodel.83679/
Best of luck with your project,
- Dave

 

Thank you both for your very prompt replies, on looking at pictures on these posts you mention perhaps mine is not as bad as I first thought. I will try and upload some pictures and will send chassis number tomorrow. My problem is that I am not very good at fabrication work and it is so difficult here to find someone sympathetic to old cars on this small island. I will try some cardboard templates and see how I go!
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login