1987 Testarossa Tire Removal | FerrariChat
Buy

1987 Testarossa Tire Removal

Discussion in 'Boxers/TR/M' started by Rujo, Jan 11, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Rujo

    Rujo Rookie

    Jan 8, 2005
    3
    #1 Rujo, Jan 11, 2005
    I need the right tool to remove my knockoff hubs. I have the standard tire tool but am looking for the right socket & wrench. I have heard that a company called "Stainless Steel Brake" has what I need. However, I need to know where they are located & how to get in touch.
     
  2. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Oct 31, 2003
    7,789
    CA
    Full Name:
    Jerry
    #2 Chiaro_Slag, Jan 11, 2005
    Hey, easy there - We ain't vintage yet!
     
  3. Myhorse

    Myhorse Formula Junior

    Oct 31, 2003
    387
    #3 Myhorse, Jan 11, 2005
    Their website is www.ssbrakes.com
    Just call them and mention that you have an 87 TR and they'll know what you want ( they don't list it on the web page)

    The wrench is a 250 torque wrench, octagonal nut, with an approx 2 ft extension to basically double what you have the wrench set at ( so tune in 175 and that translate into 350 ft lbs)

    approx 385 USD all said and done.

    Used primarily for reinstalling the nut not so much for removal.I bent my extender trying to do that. Like you, my ring tool and hammer is about as useful as a one legged man in an ass kicking contest. So you want to actually buy a snap on heavy duty wrench ( they have them from 400 - 1000 ft lbs ) with a 3/4 drive to have for removal. ( $1000 but you can get them lower if not snap on - or check out pawn shops for a stolen..I mean used one) A friend of mine with an F40 does this. The 3/4 drive fits onto the octagonal nut and that will eliminate the need to use that stupid ring nut tool.

    The only thing is that those wrenches are about 48" long and will not fit in the car. The ssbrakes wrench device is very nicely packed ina canvas bag that goes in the bonnet.

    If you need further info just pm me.

    Myhorse

    (And Move this out of the "vintage" as Chiaro Slag suggests)
     

Share This Page