Wanted - 1989 Testarossa flywheel | FerrariChat

Wanted 1989 Testarossa flywheel

Discussion in 'Ferrari Parts & Collectibles' started by Mitchell kohrmann, Apr 13, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mitchell kohrmann

    Oct 7, 2019
    9
    Columbus, Ohio
    Full Name:
    Mitchell Arthur kohrmann
    Looking for a testarossa flywheel. I went to do my clutch yesterday and was greeted with a poorly fit unknown aftermarket flywheel. I have found plenty of part numbers including
    136025
    137218
    136023
    125780
    123923
    130644
    128538
    It is very confusing to figure which is right for my car, and the two that I found were almost $5,000 which is absurd for a flywheel. I’ll attach my engine stamp, if anyone has, or knows of any I would greatly appreciate it! I’d like to get back to driving ASAP. Thanks!
    Image Unavailable, Please Login
     
    BLKSTALLION likes this.
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,035
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    F113A040 is a US version TR engine so you'd need:

    125780
    136025
    or
    137218

    depending on the SN of your chassis -- which is?
     
  3. Mitchell kohrmann

    Oct 7, 2019
    9
    Columbus, Ohio
    Full Name:
    Mitchell Arthur kohrmann
    Mine is Zffsg17a7k0080460

    thank you for your continued help!
     
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,035
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    Then 137218 is your target. (I'm a little surprised that you're having so much difficulty finding one -- when a TR gets crunched or carbequed or splatters an engine, usually the flywheel is still OK, and it's not like they are highly desired to be used on something else.)
     
    Mitchell kohrmann likes this.
  5. Mitchell kohrmann

    Oct 7, 2019
    9
    Columbus, Ohio
    Full Name:
    Mitchell Arthur kohrmann
    Great! That’s actually one of the two I was able to find when I was searching them all. Eurospares has one for £1,300, maybe I’ll keep searching for a used one as well. Now just to find the 9 studs and three dowels. 124103 is the only one I haven’t been able to locate.
     
    BLKSTALLION likes this.
  6. Trevor Hammond

    Mar 28, 2019
    16
    Hudson valley
    Full Name:
    Trevor
    Try andrew at m&d clutches in the uk
    He was closing up his shop but, might have what you need still. Had them do my 355 flywheel.


    Sent from my iPhone using FerrariChat
     
  7. britalian

    britalian Karting

    Feb 10, 2006
    64
    Atlanta
    Full Name:
    LL
    Hi Mitchell,
    From your posts I wonder if your flywheel is the original that was just drilled for the aftermarket clutch pack? Not sure you could use that one with a factory clutch pack (135076 ?) at this point.
    I have quite a few used Ferrari flywheels one of which may be correct for your car. This one is my best guess. Timing stamp diagram and photos attached.
    3 dowels
    3 pins
    6 studs
    $850.00 including ground shipping to Ohio.

    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    Mitchell kohrmann likes this.
  8. Christian R.

    Christian R. Rookie

    Sep 5, 2020
    1
    Full Name:
    Christian rodriguez
    Hello mitchell, wondering what you end it up doing on with flywheel
     
    BLKSTALLION likes this.
  9. BLKSTALLION

    BLKSTALLION Rookie
    BANNED

    Oct 4, 2020
    15
    Los Angeles
    Full Name:
    tony Ng
    Hi Britalian, is this still for sale? What year is suitable. Here is my VIN: ZFFSG17A5L0084041. Im in L.A
     

Share This Page