1st 512 TR lift | FerrariChat

1st 512 TR lift

Discussion in 'Boxers/TR/M' started by marchambault, Dec 16, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. marchambault

    marchambault Rookie

    Aug 4, 2011
    20
    Toronto, Canada
    Hi Guys,

    I am trying to lift my 512 TR for the first time with a set of jacks. However, I am confused as to where the lifts should be positioned underneath the chassis. I did not find any indication as to the where this would be in the user manual.

    Any help or photos would be appreciated. I just don't want to make any mistakes on the first try.

    Thanks,

    Mathieu
     
  2. Philwozza

    Philwozza Formula 3

    Apr 23, 2009
    2,045
    Winchester UK
    Full Name:
    Phil Worrall
    if you look under the car Mathieu it is pretty obvious. You don't need the manual to find the spot.

    P
     
  3. tvu

    tvu Formula 3
    Silver Subscribed

    Apr 13, 2004
    1,362
    Southern California
    Full Name:
    Trieu
    I don't know how you are lifting the car and where you want to end up - 2 front on jacks, or 2 rear on jacks, or all 4 four on jack stands. But you have to be careful not to flex the car's frame too much else the rear glass will crack. That will be an expensive replacement. I'm sure you can do a search on this - others have even replaced it with plexiglass.

    Good luck
     
  4. Melvok

    Melvok F1 World Champ
    Owner Silver Subscribed

    Jul 25, 2008
    14,263
    Amersfoort, The Netherlands, Europe.
    Full Name:
    Mel
    Please do first look here !!
     

Share This Page