2-wire electrician Amps question: | FerrariChat

2-wire electrician Amps question:

Discussion in '365 GT4 2+2/400/412' started by Faber, Sep 22, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Faber

    Faber Formula Junior

    May 5, 2011
    954
    TX Hill Country
    Full Name:
    Tom G.
    Hi - At idle: Left or right indicators on: Amps read +10 normally - flashers working as advertised. Switch on low beams and amps go to zero w/ affect on indicators, switch on high beams and they go to -10? with greater affect on indicators. Affects = slower & weaker flash on L/R indicators. Any insights/recommendations? Thanks,
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,785
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    What is your idle RPM? (1000 RPM would be better than 900 RPM for this issue)

    What is the voltage at the battery at this RPM? (You might try measuring this with: A. everything off, B. turn signals on, C. turn signals and low beams on, D. turn signals and high beams on.)

    Do you still have the stock 115A alternator? (That is a huge alternator for the era.)

    Have you headlight bulbs been "upgraded" or are they still stock?
     
  3. Faber

    Faber Formula Junior

    May 5, 2011
    954
    TX Hill Country
    Full Name:
    Tom G.
    Hi Steve and thanks a lot. Will investigate your above and respond.
     

Share This Page