2003 360 F1 wont go into gear. | FerrariChat
Buy

2003 360 F1 wont go into gear.

Discussion in 'Technical Q&A' started by ame262, Jul 4, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ame262

    ame262 Rookie

    Jul 3, 2012
    20
    #1 ame262, Jul 4, 2012
    I have a 04 360 F1 spider 17k miles found oil under engine.will not go into gear.Any info would help.Also light on dash low pressure warning.Thanks for any pointers to look for a fix.
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,666
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Jul 4, 2012
    Could it be hydraulic fluid - in which case there's a block that often splits and has a Hill Engineering replacement - see other threads in the 360 section
     
  3. ame262

    ame262 Rookie

    Jul 3, 2012
    20
    #3 ame262, Jul 4, 2012
    Yes it is a hydraulic fluid leak
     
  4. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,451
    Winston Salem, NC
    #4 Ricambi America, Jul 4, 2012
    ^ Of course it could be many things, but as Jimmie indicates the fluid junction block is always a suspect. The Hill Engineering version is available here:

    http://www.ricambiamerica.com/product_info.php?products_id=337835



    .
     
  5. ame262

    ame262 Rookie

    Jul 3, 2012
    20
    #5 ame262, Jul 4, 2012
    Thanks Guys for the info. When I find the leak.I will go to ricambiamerica for all my parts needs.
     
  6. open roads

    open roads F1 Rookie

    Jan 28, 2007
    3,799
    Sarasota, Fl.
    Full Name:
    Stan
    #6 open roads, Jul 4, 2012
    Welcome.

    Lots of help here. Recomend a search. That'll probably get it.
     

Share This Page