2007 F430 How to replace the Hazard/Parking Light Switches?

Ashtray comes out, then shift plate (Rev. Auto), then the carbon plate can be removed. You will see how to get the switch out after you have it apart.

 

If they are sticky, we can refinish them. We do those parts every week.

If you would like to discuss, please email or call me:

dave.lelonek@**********.com

716-539-0200 x 355

 

From my memory, clips. Once you take out the ashtray, you can reach your fingers underneath and pop out the panel.

 

ridge55 is right, it should be pull out. The ashtray holds it down, so you do have to take it out first.

 

I believe you need to remove the entire console as screws hold it down

 

Image Unavailable, Please Login Image Unavailable, Please Login

I don’t think that is the case. I replaced all the plates/panels with carbon fiber and did not need to take off the entire consol. Here is a picture of the back and side of the plate. The screw holes you see are to attach the switches to the plate.

 

True, but the screws sandwich a metal plate that has clips. I'm pretty sure we should have a photo showing it and I'll try to find it later and post if I remember.

 

Just because I like wasting bandwidth on the internet and consuming Rob's web server disk array, here's another picture: Image Unavailable, Please Login

 

Here is a bottom side view showing the plate with 4 spring clips.


Image Unavailable, Please Login