Can anyone help? I have nearly finished restoring my 1973 Dino 246gts but need a few more "original" parts to complete. They are:- Pair of original Arman "crossover" wiper arms, any condition, will refurbish, (attached image). Original "push in receiver type" Klippan static seat belt parts, Original engine mount x 1off, (Rubber is too soft in new types). GTS door glass end stop rubber mouldings, (both sides), attached image. I know the above original parts are not easy to find but if anyone can help that would be great. Regards, James. Image Unavailable, Please Login Image Unavailable, Please Login
Dino Parts has reproduction plastic pieces for the GTS window. I have a bunch of wiper arms. Do you have the lengths required? I have some of the larger Klippan receivers (not sure of condition). Do you have a pic of what you are looking for? https://www.dinoparts.com/en/parts-accessories/ferrari/dino-246-gtgts/body-fittings/doors-seals-more/?p=2
racerboy9, Thankyou for your e-mail regarding Klippan seatbelt parts and wiper arms. i have attached an image of the "crossover" wiper arms which are 38cm long. I have also attached some Klippan seatbelt images of the parts that I need. Much appreciated if you can help. Regards, James. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
James, All my wiper arms are too long. I remember T-Rutlands had a bunch of used and NOS arms I went through at one time. I brought my longer USA spec arms to match so probably passed over shorter ones. Might be worth an inquiry to see if they have a match. I have no seat belt parts that match yours.
racerboy9, Thankyou for your reply. Are some your wiper arms made by Arman? I appreciate the arms that you have are too long but I could modify them to suit. If you could send me an image that would be good. Regards, James,
James, You might check these cross over arms from OKP parts. They are stainless but you could paint them. Length is not mentioned. https://www.okp.de/xtc2/Ferrari/40-Electrical-system/Washer-system/Set-wiper-arms-stainless-steel-Ferrari-246-Dino-L-Serie::24641.html?language=en
suggest you investigate getting your own metal stamps and making them, rare as hens teeth. https://www.cooksongold.com/Metal-Stamping/Impressart-Basic-Letter-Stamp-Set--Lowercase-3mm-prcode-999-IA66 good replica of font + size at 3mm.. ? Image Unavailable, Please Login
