246 dino rhd wiper motor electrical connectors

Can anyone help?
I have a 246 wiper motor which has a 6 pin plug fitted.
The wiring harness that is original, (246GTS rhd) has a pair of 3 way sockets fitted, (1 black + 1 white).
The problem is that they obviously will not physically connect together.
If the 6 pin wiper plug is changed to a pair of 3 way sockets to suit the wiring loom I am then stuck
not knowing how the electrical wiring/colours are configured.
If anyone can help me out I would be most grateful.
Regards,
James.

 

Dear Sir,
I have attached an image of the wiper motor that I have.
I think it is the correct motor as shown in your second image.
The problem is mating the 6 pin motor connector to the original loom which has 2 x 3 way sockets, (1 black + 1 white).
If I could adapt the wiring loom connectors to suit the wiper connector that would be good.
Regards,
James.
Image Unavailable, Please Login Image Unavailable, Please Login