246 Radiator Fan Motor Grub Screw | FerrariChat

246 Radiator Fan Motor Grub Screw

Discussion in '206/246' started by boboding, May 4, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. boboding

    boboding Rookie

    Joined:
    Oct 8, 2009
    Messages:
    15
    Location:
    Upstate NY
    Full Name:
    Bob Fennell
    Can someone tell me what type of screw holds the fan on the shaft that is in the access hole on the side? I thought it might my hex key but nothing fits and I can't get the motor out of the car with the fan attached. Not sure it will come out when it's off either. There is almost no space with AC heat exchanger sandwiched in there. Thanks as always!
     
    boboding, May 4, 2022
    #1
  2. omgjon

    omgjon F1 Rookie Owner Rossa Subscribed

    Joined:
    Feb 13, 2005
    Messages:
    3,569
    Location:
    Spicewood, Texas
    Full Name:
    Jon Gunderson
    It is usually a slotted grub screw. Most of the ones I've done have been seized and I've had to drill them out. I then replace with a hex head stainless grub screw. Good chance you will have to take the radiator out to get the fan motor out because the motor with the fan won't fit through the grill opening.
     
    omgjon, May 4, 2022
    #2
    swift53 likes this.

Share This Page